Charger Care & Cleaning: Keep It Safe and Accurate

Small habits. Big performance.

Your eBike charger is more than a power brick — it’s a precision electronic device.
Every volt, every amp, and every degree of temperature control matters.

Keeping it clean, cool, and properly handled doesn’t just make it last longer — it keeps your charging accurate and safe.

Let’s walk through how to care for your Cyberpika Smart GaN Charger the right way.

🌬️ Keep It Clean

Dust, dirt, or metal debris can interfere with charging precision and even short out connections.

What to do:

• Always unplug before cleaning.

• Use a dry microfiber cloth to gently wipe surfaces.

• Blow away dust from vents using compressed air (never your breath — moisture counts).

• Inspect the connector head (DC barrel / XLR / Rosenberger) for dirt or corrosion.

✅ Keep ports clean for reliable contact.
✅ Never use water or alcohol sprays directly on the charger.

Clean ports mean clean power.

🔥 Cooling & Airflow

Your GaN charger runs cooler than traditional silicon ones — but it still needs airflow.

Avoid:

• Covering it with clothing or bags while charging

• Using it in enclosed boxes or drawers

• Direct sunlight or near heat sources

Do:

• Place it on a flat, hard surface

• Keep at least 5 cm of space around it

• Allow it to cool fully before storing

GaN components are thermally efficient, but consistent ventilation keeps performance stable for years.

🔌 Cable & Connector Care

Cables are often the first part to fail — not the charger. Treat them gently.

Tips:

• Don’t yank cables from sockets; pull by the plug, not the wire.

• Avoid tight bends or knots.

• Coil cables loosely (like audio cords).

• Inspect ends for frays or wear every few weeks.

• Keep connectors dry — especially DC barrels and Rosenberger heads.

A clean connector is a safe connector.

🧠 Safe Handling & Storage

When you’re done charging:

• Unplug both ends — wall and battery.

• Let it cool for a few minutes.

• Store in a dry, ventilated place.

Avoid:

• Placing heavy items on the charger

• Dropping it or letting it hang from a cord

• Leaving it in extreme heat or cold (car trunks, balconies, or damp garages)

Cyberpika’s compact GaN design is tough, but gentle handling keeps calibration accurate and protection layers intact.

🧴 Cleaning Checklist

A few minutes of care = months of extended lifespan.

🧩 Inside the Cyberpika Advantage

Every Cyberpika Smart GaN Charger is built with maintenance in mind:

• Anti-dust port design keeps connectors clean longer

• Sealed housing resists moisture and oxidation

• Thermal efficiency reduces heat fatigue

• Intelligent shutdown activates if dust or blockage raises temperature

• Durable matte shell resists scratches and fingerprints

It’s built to look good, perform better, and age gracefully — like your favorite ride.

💡 The Takeaway

Treat your charger like your bike — with a little care and attention.

Because a clean, cool, and well-maintained Cyberpika Smart GaN Charger doesn’t just charge —
it protects, lasts, and performs.

Small care. Big performance.
That’s the Cyberpika Way ⚡