ZOOZ ULTRA RIPSTER - GEN 2 Charger & Compatibility Guide

✓ Connector & Specs Verified

ZOOZ ULTRA RIPSTER - GEN 2 Charger & Compatibility Guide

The CyberPika 52V Smart E-Bike Charger + CM 4-PIN is compatible with the ZOOZ ULTRA RIPSTER - GEN 2 Gen 2 setup documented here.

This guide covers a 52V lithium-ion battery system using 58.8V charging and CM 4-PIN. The CyberPika 52V Smart Charger provides 58.8V output at up to 3A and connects through CM 4-PIN.

View Compatible Charger →
ZOOZ ULTRA RIPSTER - GEN 2 e-bike

ZOOZ ULTRA RIPSTER - GEN 2 Charger Compatibility

Specification ZOOZ ULTRA RIPSTER - GEN 2 CyberPika
Variants Gen 2 ✓ Covered
Battery system 52V lithium-ion 52V charger
Battery capacity 15 Ah / 780 Wh ✓ Compatible
Charging voltage 58.8V 58.8V
Connector CM 4-PIN CM 4-PIN
Charge levels Standard full charge 20% / 50% / 80% / 100%
Compatibility — ✓ Verified Setup

Recommended setup: CyberPika 52V Smart E-Bike Charger + CM 4-PIN

Compatibility verification: manufacturer specifications

Why Does This Charger Work with the ZOOZ ULTRA RIPSTER - GEN 2?

Choosing an e-bike charger requires matching both the electrical specifications and charging connector.

The documented ZOOZ ULTRA RIPSTER - GEN 2 setup uses a 52V lithium-ion battery system. A compatible full-charge output is 58.8V, matching the 58.8V output of the CyberPika 52V Smart Charger.

The charging setup documented here uses CM 4-PIN. CyberPika connects through CM 4-PIN. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.

CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets. Actual charging current and charging time depend on the battery and its battery-management system.

ZOOZ OEM Charger vs. CyberPika

Feature ZOOZ OEM CyberPika
Output 58.8V 58.8V / up to 3A
Connector CM 4-PIN CM 4-PIN
80% Daily — ✓
100% Full ✓ ✓
50% Storage — ✓
20% Shipping — ✓

Check the Charging Port on Your ULTRA RIPSTER - GEN 2

Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your ZOOZ ULTRA RIPSTER - GEN 2 charging port with the documented setup below before ordering.

ZOOZ ULTRA RIPSTER - GEN 2 CM 4-PIN charging port

ZOOZ ULTRA RIPSTER - GEN 2 charging port

Charging port documented for the compatible ZOOZ ULTRA RIPSTER - GEN 2 setup.

CM 4-PIN charger connector for ZOOZ ULTRA RIPSTER - GEN 2

Compatible CM 4-PIN connector

Connector used with the recommended CyberPika charging setup.

Important: Gen 2 model. Gen 2 uses updated specifications compared to earlier generation models.

Check Your Original ULTRA RIPSTER - GEN 2 Charger Label

Your original charger label is another useful way to verify the charging requirements of your ZOOZ ULTRA RIPSTER - GEN 2.

ZOOZ ULTRA RIPSTER - GEN 2 original charger label

ZOOZ ULTRA RIPSTER - GEN 2 charger label

Verify the original charger shows the compatible 58.8V output.

If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.

Which ZOOZ ULTRA RIPSTER - GEN 2 Models Are Covered?

This guide applies to the Ultra Ripster Gen 2 specific configuration documented here.

✓ Gen 2 ✓ 52V Battery ✓ CM 4-PIN
Model / generation note: Gen 2 model. Gen 2 uses updated specifications compared to earlier generation models.

Smart Charging for Everyday ULTRA RIPSTER - GEN 2 Use

You don't necessarily need to charge your ULTRA RIPSTER - GEN 2 to 100% after every ride. CyberPika gives you four selectable charging targets.

80%
Daily
For everyday riding when maximum available range isn't needed.
100%
Adventure
For longer rides when you want maximum available range.
50%
Storage
For periods when the bike won't be ridden regularly.
20%
Shipping
A lower state-of-charge option when appropriate.

The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.

🛡️ Worry-Free Compatibility Guarantee

If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.

If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.

View the ULTRA RIPSTER - GEN 2 Compatible Charger →

ZOOZ ULTRA RIPSTER - GEN 2 Charger FAQ

What charger does the ZOOZ ULTRA RIPSTER - GEN 2 use?

The documented setup uses a 52V lithium-ion battery system and a 58.8V full charging output with a CM 4-PIN charging connection.

What voltage charger does the ZOOZ ULTRA RIPSTER - GEN 2 need?

The documented 52V lithium-ion battery system uses a 58.8V charging output.

What connector does the ZOOZ ULTRA RIPSTER - GEN 2 use?

The setup documented on this page uses CM 4-PIN. CyberPika connects using CM 4-PIN.

Do I need an adapter for the ZOOZ ULTRA RIPSTER - GEN 2?

Yes. The recommended CyberPika setup uses the CM 4-PIN.

Are there different ZOOZ ULTRA RIPSTER - GEN 2 charger versions or generations?

Gen 2 uses updated specifications compared to earlier generation models.

Can I charge my ZOOZ ULTRA RIPSTER - GEN 2 to 80%?

Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.

Recommended for Ultra Ripster Gen 2 specific

CyberPika 52V Smart E-Bike Charger + CM 4-PIN

ZOOZ ULTRA RIPSTER - GEN 2 · Gen 2 · 58.8V Charging

58.8V Up to 3A CM 4-PIN CM 4-PIN 20 / 50 / 80 / 100% ✓ Verified
Shop the ULTRA RIPSTER - GEN 2 Compatible Charger →