tag -->

Wing Freedom E-Bike Charger & Compatibility Guide

✓ Customer-Confirmed Setup

Wing Freedom E-Bike Charger & Compatibility Guide

The CyberPika 36V Smart E-Bike Charger with Standard 3-Pin Adapter is compatible with Wing Freedom bikes using the verified 36V / 42V special 3-pin charging setup shown here.

Wing Freedom S2, Freedom 2, Freedom X, Freedom ST and Freedom Fatty families use 36V lithium-ion battery systems in documented configurations. The special 3-pin charger referenced for the Freedom S2 provides a 42V / 2A output. The CyberPika 36V Smart Charger provides the same 42V charging voltage at up to 4A and connects through the Standard 3-Pin Adapter.

Because Wing has used different charging connectors across some model generations, verify that your bike has the same 3-pin charging port shown on this page before ordering.

View Compatible Charger →

Wing Freedom Charger Compatibility

Specification Wing Freedom Setup CyberPika
Battery system 36V lithium-ion 36V charger
Charging voltage 42V 42V
OEM charging current 2A documented setup Up to 4A
Connector Special 3-pin charging port Standard 3-Pin Adapter
Charge levels Standard full charge 20% / 50% / 80% / 100%
Compatibility Verified 3-pin configurations ✓ Customer Confirmed

Recommended setup: CyberPika 36V Smart E-Bike Charger + Standard 3-Pin Adapter

Compatibility verification: 36V battery specifications, 42V charger output, physical 3-pin connector evidence, original charger reference, and customer-confirmed charging.

Why Does This Charger Work with Compatible Wing Freedom Bikes?

Choosing an e-bike charger requires matching both the electrical specifications and charging connector.

The Wing Freedom configurations covered here use 36V lithium-ion batteries. A typical 36V lithium-ion battery reaches approximately 42V when fully charged.

The Freedom S2 replacement-charger reference supplied for this guide is rated at 42V / 2A and uses a special 3-pin charging connection.

The CyberPika 36V Smart Charger provides the same 42V charging voltage and connects through the compatible Standard 3-Pin Adapter.

CyberPika also lets you choose 20%, 50%, 80%, or 100% charge targets depending on how you plan to ride or store the bike.

Wing Freedom Charger vs. CyberPika

Feature Wing Replacement Charger CyberPika
Battery system 36V 36V
Charging output 42V / 2A documented setup 42V / up to 4A
Connector Special 3-pin Standard 3-Pin Adapter
80% Daily
100% Full
50% Storage
20% Shipping

Check the Charging Port on Your Wing Freedom

This is the most important verification step for Wing Freedom bikes. Some Freedom generations use a 3-pin charging connection, while other configurations have been sold with different connectors.

Wing Freedom special 3-pin e-bike charging port

Compatible Wing Freedom 3-pin charging port

Compare your bike's charging port with this verified 3-pin configuration before ordering.

Standard 3-pin charging connector for Wing Freedom e-bike

Compatible Standard 3-Pin connector

Connector used with the CyberPika Standard 3-Pin Adapter.

Important: If your Freedom 2, Freedom X, Freedom Fatty, Freedom ST, S, or S2 does not have the same 3-pin port shown above, do not order based on the model name alone. Contact us with a photo of your charging port first.

Check Your Original Wing Freedom Charger

The original charger label is another useful way to verify the correct electrical setup.

Wing Freedom 36V e-bike 42V battery charger

Wing Freedom charger reference

The compatible setup documented here uses a 42V charging output for a 36V lithium-ion battery.

If your original charger shows a substantially different output voltage or uses a different connector, send us a photo before using a replacement charger.

Which Wing Freedom Models Are Covered?

Wing Freedom models across several generations use 36V battery systems. This guide applies specifically to bikes that also use the verified special 3-pin charging port shown above.

Freedom S Freedom S2 Freedom 2 Freedom X Freedom ST Freedom Fatty
Connector-generation note: The model names above are not enough by themselves to guarantee connector compatibility. Replacement-charger listings exist for Freedom 2, Freedom X and Freedom Fatty configurations that specifically identify a non-3-pin connection. Always compare your port with the photos on this page.

Wing Freedom Battery Sizes

Several Wing Freedom models were offered with different battery capacities while keeping the same nominal 36V electrical platform.

36V / 8.8Ah 36V / 10.4Ah 36V / 14Ah

Battery capacity affects range and charging time, but a compatible 36V lithium-ion battery still uses approximately a 42V full charging voltage.

Smart Charging for Everyday Wing Freedom Use

You don't necessarily need to charge your Wing Freedom battery to 100% after every ride. CyberPika gives you four selectable charge targets.

80%
Daily
For everyday commuting when maximum available range isn't needed.
100%
Adventure
For longer rides when you want maximum available range.
50%
Storage
For periods when the bike won't be ridden regularly.
20%
Shipping
A lower state-of-charge option when appropriate.

The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.

🛡️ Worry-Free Compatibility Guarantee

If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.

Because Wing has used different connector configurations, send us your exact Freedom model, a photo of the charging port, and a photo of the original charger label if anything looks different from the examples above.

View the Wing Freedom Compatible Charger →

Wing Freedom E-Bike Charger FAQ

What voltage charger does a Wing Freedom e-bike use?

The Freedom configurations documented here use 36V lithium-ion batteries and a 42V charging output.

What charger does the Wing Freedom S2 use?

The replacement-charger reference supplied for the Freedom S2 is rated at 42V / 2A and uses a special 3-pin connection.

Does every Wing Freedom bike use a 3-pin charger?

No. Connector configurations can vary by model and generation. Some replacement-charger listings specifically identify Freedom 2, Freedom X and Freedom Fatty configurations that do not use the 3-pin connection shown on this page.

Does CyberPika work with the Wing Freedom S2?

Yes, for the customer-confirmed 36V / 42V special 3-pin configuration documented on this page.

Does CyberPika work with the Freedom 2, Freedom X or Freedom ST?

It can when the bike uses the same 36V / 42V special 3-pin charging setup shown here. Because connector generations vary, compare your charging port with the photos before ordering.

Why does a 36V Wing battery use a 42V charger?

36V is the nominal battery voltage. A typical 36V lithium-ion battery reaches approximately 42V when fully charged, which is why the charger output is higher than the battery's nominal rating.

Is CyberPika faster than the 2A Wing charger?

The CyberPika 36V Smart Charger can provide up to 4A, compared with the 2A charger documented for the Freedom S2 setup. Actual charging current and charging time depend on the battery and its battery-management system.

Can I charge my Wing Freedom battery to 80%?

Yes, on a compatible setup. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.

Recommended for Compatible Wing Freedom 3-Pin Setups

CyberPika 36V Smart E-Bike Charger + Standard 3-Pin Adapter

36V Wing Freedom Bikes · 42V Charging · Verified 3-Pin Setup

42V Up to 4A Standard 3-Pin 36V Battery 20 / 50 / 80 / 100% ✓ Customer Confirmed
Shop the Wing Freedom Compatible Charger →