Velowave Range 2.0 Charger & Compatibility Guide
Velowave Range 2.0 Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger + Standard 3-Pin V2 Adapter is compatible with the Velowave Range 2.0 setup documented here.
This guide covers a 48V lithium-ion battery system using 54.6V charging and Standard 3-Pin V2. The CyberPika 48V Smart Charger provides 54.6V output at up to 3A and connects through Standard 3-Pin V2 Adapter.
Compatibility has also been confirmed through customer use.
View Compatible Charger →
Velowave Range 2.0 Charger Compatibility
| Specification | Velowave Range 2.0 | CyberPika |
|---|---|---|
| Battery system | 48V lithium-ion | 48V charger |
| Battery capacity | 15Ah / 720Wh | ✓ Compatible |
| Charging voltage | 54.6V | 54.6V |
| Charging current | 2A OEM charger | Up to 3A |
| Connector | Standard 3-Pin V2 | Standard 3-Pin V2 Adapter |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Customer Confirmed |
Recommended setup: CyberPika 48V Smart E-Bike Charger + Standard 3-Pin V2 Adapter
Compatibility verification: manufacturer specifications, physical connector verification, original charger-label evidence, customer-confirmed charging
Why Does This Charger Work with the Velowave Range 2.0?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Velowave Range 2.0 setup uses a 48V lithium-ion battery system. A compatible full-charge output is 54.6V, matching the 54.6V output of the CyberPika 48V Smart Charger.
The charging setup documented here uses Standard 3-Pin V2. CyberPika connects through Standard 3-Pin V2 Adapter. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and its battery-management system. CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets.
Velowave OEM Charger vs. CyberPika
| Feature | Velowave OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 2A | 54.6V / up to 3A |
| Connector | Standard 3-Pin V2 | Standard 3-Pin V2 Adapter |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your Range 2.0
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Velowave Range 2.0 charging port with the documented setup below before ordering.
Velowave Range 2.0 charging port
Charging port documented for the compatible Velowave Range 2.0 setup.
Compatible Standard 3-Pin V2 connector
Connector used with the recommended CyberPika charging setup.
Check Your Original Range 2.0 Charger Label
Your original charger label is another useful way to verify the charging requirements of your Velowave Range 2.0.
Velowave Range 2.0 charger label
Documented original charging specification: 54.6V / 2A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Velowave Range 2.0 Models Are Covered?
This guide applies to the Velowave Ranger 2.0 (also referred to as Ranger 2.0 / ST 2.0 or Ranger Fat Tire Electric Bike) configuration documented here.
Smart Charging for Everyday Range 2.0 Use
You don't necessarily need to charge your Range 2.0 to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the Range 2.0 Compatible Charger →Velowave Range 2.0 Charger FAQ
What charger does the Velowave Range 2.0 use?
The documented setup uses a 48V lithium-ion battery system and a 54.6V full charging output with a Standard 3-Pin V2 charging connection.
What voltage charger does the Velowave Range 2.0 need?
The documented 48V lithium-ion battery system uses a 54.6V charging output.
What connector does the Velowave Range 2.0 use?
The setup documented on this page uses Standard 3-Pin V2. CyberPika connects using Standard 3-Pin V2 Adapter.
Do I need an adapter for the Velowave Range 2.0?
Yes. The recommended CyberPika setup uses the Standard 3-Pin V2 Adapter.
Is the CyberPika charger faster than the original Velowave charger?
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and BMS.
Are there different Velowave Range 2.0 charger versions or generations?
Except Ranger version 1.0 which used a DC connector.
Can I charge my Velowave Range 2.0 to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger + Standard 3-Pin V2 Adapter
Velowave Range 2.0 · 54.6V Charging