Vanpowers UrbanGlide-Standard Charger & Compatibility Guide
Vanpowers UrbanGlide-Standard Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger + Standard 3-Pin Adapter is compatible with the Vanpowers UrbanGlide-Standard Standard setup documented here.
This guide covers a 48V lithium-ion battery system using 54.6V charging and Standard 3-Pin. The CyberPika 48V Smart Charger provides 54.6V output at up to 3A and connects through Standard 3-Pin Adapter.
View Compatible Charger →
Vanpowers UrbanGlide-Standard Charger Compatibility
| Specification | Vanpowers UrbanGlide-Standard | CyberPika |
|---|---|---|
| Variants | Standard | ✓ Covered |
| Battery system | 48V lithium-ion | 48V charger |
| Battery capacity | 14.4Ah / 692Wh | ✓ Compatible |
| Charging voltage | 54.6V | 54.6V |
| Charging current | 3A OEM charger | Up to 3A |
| Connector | Standard 3-Pin | Standard 3-Pin Adapter |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Verified Setup |
Recommended setup: CyberPika 48V Smart E-Bike Charger + Standard 3-Pin Adapter
Compatibility verification: manufacturer specifications, original charger-label evidence
Why Does This Charger Work with the Vanpowers UrbanGlide-Standard?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Vanpowers UrbanGlide-Standard setup uses a 48V lithium-ion battery system. A compatible full-charge output is 54.6V, matching the 54.6V output of the CyberPika 48V Smart Charger.
The charging setup documented here uses Standard 3-Pin. CyberPika connects through Standard 3-Pin Adapter. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger and CyberPika both provide up to about 3A maximum charging current. CyberPika adds selectable 20%, 50%, 80%, and 100% charge targets.
Vanpowers OEM Charger vs. CyberPika
| Feature | Vanpowers OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 3A | 54.6V / up to 3A |
| Connector | Standard 3-Pin | Standard 3-Pin Adapter |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your UrbanGlide-Standard
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Vanpowers UrbanGlide-Standard charging port with the documented setup below before ordering.
Vanpowers UrbanGlide-Standard charging port
Charging port documented for the compatible Vanpowers UrbanGlide-Standard setup.
Compatible Standard 3-Pin connector
Connector used with the recommended CyberPika charging setup.
Check Your Original UrbanGlide-Standard Charger Label
Your original charger label is another useful way to verify the charging requirements of your Vanpowers UrbanGlide-Standard.
Vanpowers UrbanGlide-Standard charger label
Documented original charging specification: 54.6V / 3A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Vanpowers UrbanGlide-Standard Models Are Covered?
This guide applies to the Vanpowers UrbanGlide-Standard e-bike specifications configuration documented here.
Smart Charging for Everyday UrbanGlide-Standard Use
You don't necessarily need to charge your UrbanGlide-Standard to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the UrbanGlide-Standard Compatible Charger →Vanpowers UrbanGlide-Standard Charger FAQ
What charger does the Vanpowers UrbanGlide-Standard use?
The documented setup uses a 48V lithium-ion battery system and a 54.6V full charging output with a Standard 3-Pin charging connection.
What voltage charger does the Vanpowers UrbanGlide-Standard need?
The documented 48V lithium-ion battery system uses a 54.6V charging output.
What connector does the Vanpowers UrbanGlide-Standard use?
The setup documented on this page uses Standard 3-Pin. CyberPika connects using Standard 3-Pin Adapter.
Do I need an adapter for the Vanpowers UrbanGlide-Standard?
Yes. The recommended CyberPika setup uses the Standard 3-Pin Adapter.
Is the CyberPika charger faster than the original Vanpowers charger?
The documented OEM charger and CyberPika are both rated around 3A maximum current. Actual charging behavior depends on the battery and BMS.
Are there different Vanpowers UrbanGlide-Standard charger versions or generations?
None
Can I charge my Vanpowers UrbanGlide-Standard to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger + Standard 3-Pin Adapter
Vanpowers UrbanGlide-Standard · Standard · 54.6V Charging