Tamobyke V20 PRO Charger & Compatibility Guide
Tamobyke V20 PRO Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger + XT60 is compatible with the Tamobyke V20 PRO setup documented here.
This guide covers a 48V lithium-ion battery system using 54.6V charging and GX16 (GX16 3PIN). The CyberPika 48V Smart Charger provides 54.6V output at up to 3A and connects through XT60.
Compatibility has also been confirmed through customer use.
View Compatible Charger →
Tamobyke V20 PRO Charger Compatibility
| Specification | Tamobyke V20 PRO | CyberPika |
|---|---|---|
| Battery system | 48V lithium-ion | 48V charger |
| Battery capacity | 18.2Ah / 873.6Wh | ✓ Compatible |
| Charging voltage | 54.6V | 54.6V |
| Charging current | 2A OEM charger | Up to 3A |
| Connector | GX16 (GX16 3PIN) | XT60 |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Customer Confirmed |
Recommended setup: CyberPika 48V Smart E-Bike Charger + XT60
Compatibility verification: manufacturer specifications, original charger-label evidence, customer-confirmed charging
Why Does This Charger Work with the Tamobyke V20 PRO?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Tamobyke V20 PRO setup uses a 48V lithium-ion battery system. A compatible full-charge output is 54.6V, matching the 54.6V output of the CyberPika 48V Smart Charger.
The charging setup documented here uses GX16 (GX16 3PIN). CyberPika connects through XT60. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and its battery-management system. CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets.
Tamobyke OEM Charger vs. CyberPika
| Feature | Tamobyke OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 2A | 54.6V / up to 3A |
| Connector | GX16 (GX16 3PIN) | XT60 |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your V20 PRO
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Tamobyke V20 PRO charging port with the documented setup below before ordering.
Tamobyke V20 PRO charging port
Charging port documented for the compatible Tamobyke V20 PRO setup.
Compatible GX16 connector
Connector used with the recommended CyberPika charging setup.
Check Your Original V20 PRO Charger Label
Your original charger label is another useful way to verify the charging requirements of your Tamobyke V20 PRO.
Tamobyke V20 PRO charger label
Documented original charging specification: 54.6V / 2A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Tamobyke V20 PRO Models Are Covered?
This guide applies to the Tamobyke V20 Pro e-bike and battery/charger specifications configuration documented here.
Smart Charging for Everyday V20 PRO Use
You don't necessarily need to charge your V20 PRO to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the V20 PRO Compatible Charger →Tamobyke V20 PRO Charger FAQ
What charger does the Tamobyke V20 PRO use?
The documented setup uses a 48V lithium-ion battery system and a 54.6V full charging output with a GX16 (GX16 3PIN) charging connection.
What voltage charger does the Tamobyke V20 PRO need?
The documented 48V lithium-ion battery system uses a 54.6V charging output.
What connector does the Tamobyke V20 PRO use?
The setup documented on this page uses GX16 (GX16 3PIN). CyberPika connects using XT60.
Do I need an adapter for the Tamobyke V20 PRO?
Yes. The recommended CyberPika setup uses the XT60.
Is the CyberPika charger faster than the original Tamobyke charger?
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and BMS.
Are there different Tamobyke V20 PRO charger versions or generations?
Some listings mention 1-hole or 3-hole variants across the Tamobyke line, but CyberPika notes specify GX16 3PIN for the V20 Pro.
Can I charge my Tamobyke V20 PRO to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger + XT60
Tamobyke V20 PRO · 54.6V Charging