Ride1Up Roadster V3 Charger & Compatibility Guide
Ride1Up Roadster V3 Charger & Compatibility Guide
The CyberPika 36V Smart E-Bike Charger with built-in DC5521 connector is compatible with the Ride1Up Roadster V3 setup documented here.
This guide covers a 36V lithium-ion battery system using 42V charging and DC5521. The CyberPika 36V Smart Charger provides 42V output at up to 4A and connects through Built-in DC5521 plug.
Compatibility has also been confirmed through customer use.
View Compatible Charger →
Ride1Up Roadster V3 Charger Compatibility
| Specification | Ride1Up Roadster V3 | CyberPika |
|---|---|---|
| Battery system | 36V lithium-ion | 36V charger |
| Battery capacity | 10Ah / 360Wh | ✓ Compatible |
| Charging voltage | 42V | 42V |
| Connector | DC5521 | Built-in DC5521 plug |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Customer Confirmed |
Recommended setup: CyberPika 36V Smart E-Bike Charger with built-in DC5521 connector
Compatibility verification: physical connector verification, customer-confirmed charging
Why Does This Charger Work with the Ride1Up Roadster V3?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Ride1Up Roadster V3 setup uses a 36V lithium-ion battery system. A compatible full-charge output is 42V, matching the 42V output of the CyberPika 36V Smart Charger.
The charging setup documented here uses DC5521. CyberPika connects through Built-in DC5521 plug. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets. Actual charging current and charging time depend on the battery and its battery-management system.
Ride1Up OEM Charger vs. CyberPika
| Feature | Ride1Up OEM | CyberPika |
|---|---|---|
| Output | 42V | 42V / up to 4A |
| Connector | DC5521 | Built-in DC5521 plug |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your Roadster V3
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Ride1Up Roadster V3 charging port with the documented setup below before ordering.
Ride1Up Roadster V3 charging port
Charging port documented for the compatible Ride1Up Roadster V3 setup.
Compatible DC5521 connector
Connector used with the recommended CyberPika charging setup.
Check Your Original Roadster V3 Charger Label
Your original charger label is another useful way to verify the charging requirements of your Ride1Up Roadster V3.
Ride1Up Roadster V3 charger label
Verify the original charger shows the compatible 42V output.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Ride1Up Roadster V3 Models Are Covered?
This guide applies to the Ride1Up Roadster V3 e-bike and battery/charger specifications configuration documented here.
Smart Charging for Everyday Roadster V3 Use
You don't necessarily need to charge your Roadster V3 to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the Roadster V3 Compatible Charger →Ride1Up Roadster V3 Charger FAQ
What charger does the Ride1Up Roadster V3 use?
The documented setup uses a 36V lithium-ion battery system and a 42V full charging output with a DC5521 charging connection.
What voltage charger does the Ride1Up Roadster V3 need?
The documented 36V lithium-ion battery system uses a 42V charging output.
What connector does the Ride1Up Roadster V3 use?
The setup documented on this page uses DC5521. CyberPika connects using Built-in DC5521 plug.
Do I need an adapter for the Ride1Up Roadster V3?
No additional adapter is required for the documented setup because the CyberPika charger uses its built-in DC5521 connector.
Can I charge my Ride1Up Roadster V3 to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 36V Smart E-Bike Charger with built-in DC5521 connector
Ride1Up Roadster V3 · 42V Charging