Ride1Up Limited V2 Charger & Compatibility Guide
Ride1Up Limited V2 Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger with built-in DC5521 connector is compatible with the Ride1Up Limited V2 V2 setup documented here.
This guide covers a 48V lithium-ion battery system using 54.6V charging and DC5521. The CyberPika 48V Smart Charger provides 54.6V output at up to 3A and connects through Built-in DC5521 plug.
Compatibility has also been confirmed through customer use.
View Compatible Charger →
Ride1Up Limited V2 Charger Compatibility
| Specification | Ride1Up Limited V2 | CyberPika |
|---|---|---|
| Variants | V2 | ✓ Covered |
| Battery system | 48V lithium-ion | 48V charger |
| Battery capacity | 14Ah / 672Wh | ✓ Compatible |
| Charging voltage | 54.6V | 54.6V |
| Charging current | 2A OEM charger | Up to 3A |
| Connector | DC5521 | Built-in DC5521 plug |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Customer Confirmed |
Recommended setup: CyberPika 48V Smart E-Bike Charger with built-in DC5521 connector
Compatibility verification: customer-confirmed charging
Why Does This Charger Work with the Ride1Up Limited V2?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Ride1Up Limited V2 setup uses a 48V lithium-ion battery system. A compatible full-charge output is 54.6V, matching the 54.6V output of the CyberPika 48V Smart Charger.
The charging setup documented here uses DC5521. CyberPika connects through Built-in DC5521 plug. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and its battery-management system. CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets.
Ride1Up OEM Charger vs. CyberPika
| Feature | Ride1Up OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 2A | 54.6V / up to 3A |
| Connector | DC5521 | Built-in DC5521 plug |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your Limited V2
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Ride1Up Limited V2 charging port with the documented setup below before ordering.
Ride1Up Limited V2 charging port
Charging port documented for the compatible Ride1Up Limited V2 setup.
Compatible DC5521 connector
Connector used with the recommended CyberPika charging setup.
Check Your Original Limited V2 Charger Label
Your original charger label is another useful way to verify the charging requirements of your Ride1Up Limited V2.
Ride1Up Limited V2 charger label
Documented original charging specification: 54.6V / 2A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Ride1Up Limited V2 Models Are Covered?
This guide applies to the Ride1Up Limited V2 (LMT'D V2) configuration documented here.
Smart Charging for Everyday Limited V2 Use
You don't necessarily need to charge your Limited V2 to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the Limited V2 Compatible Charger →Ride1Up Limited V2 Charger FAQ
What charger does the Ride1Up Limited V2 use?
The documented setup uses a 48V lithium-ion battery system and a 54.6V full charging output with a DC5521 charging connection.
What voltage charger does the Ride1Up Limited V2 need?
The documented 48V lithium-ion battery system uses a 54.6V charging output.
What connector does the Ride1Up Limited V2 use?
The setup documented on this page uses DC5521. CyberPika connects using Built-in DC5521 plug.
Do I need an adapter for the Ride1Up Limited V2?
No additional adapter is required for the documented setup because the CyberPika charger uses its built-in DC5521 connector.
Is the CyberPika charger faster than the original Ride1Up charger?
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and BMS.
Can I charge my Ride1Up Limited V2 to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger with built-in DC5521 connector
Ride1Up Limited V2 · V2 · 54.6V Charging