Retrospec Valen Rev Charger & Compatibility Guide
Retrospec Valen Rev Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger + CSM 4-PIN is compatible with the Retrospec Valen Rev Valen Rev+ setup documented here.
This guide covers a 48V lithium-ion battery system using 54.6V charging and CSM 4-PIN. The CyberPika 48V Smart Charger provides 54.6V output at up to 3A and connects through CSM 4-PIN.
View Compatible Charger →
Retrospec Valen Rev Charger Compatibility
| Specification | Retrospec Valen Rev | CyberPika |
|---|---|---|
| Variants | Valen Rev+ | ✓ Covered |
| Battery system | 48V lithium-ion | 48V charger |
| Battery capacity | 15 Ah / 720 Wh | ✓ Compatible |
| Charging voltage | 54.6V | 54.6V |
| Charging current | 2A OEM charger | Up to 3A |
| Connector | CSM 4-PIN | CSM 4-PIN |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Verified Setup |
Recommended setup: CyberPika 48V Smart E-Bike Charger + CSM 4-PIN
Compatibility verification: manufacturer specifications
Why Does This Charger Work with the Retrospec Valen Rev?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Retrospec Valen Rev setup uses a 48V lithium-ion battery system. A compatible full-charge output is 54.6V, matching the 54.6V output of the CyberPika 48V Smart Charger.
The charging setup documented here uses CSM 4-PIN. CyberPika connects through CSM 4-PIN. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and its battery-management system. CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets.
Retrospec OEM Charger vs. CyberPika
| Feature | Retrospec OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 2A | 54.6V / up to 3A |
| Connector | CSM 4-PIN | CSM 4-PIN |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your Valen Rev
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Retrospec Valen Rev charging port with the documented setup below before ordering.
Retrospec Valen Rev charging port
Charging port documented for the compatible Retrospec Valen Rev setup.
Compatible CSM 4-PIN connector
Connector used with the recommended CyberPika charging setup.
Check Your Original Valen Rev Charger Label
Your original charger label is another useful way to verify the charging requirements of your Retrospec Valen Rev.
Retrospec Valen Rev charger label
Documented original charging specification: 54.6V / 2A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Retrospec Valen Rev Models Are Covered?
This guide applies to the Retrospec Valen Rev+ official specifications, review sites, and retailer pages. configuration documented here.
Smart Charging for Everyday Valen Rev Use
You don't necessarily need to charge your Valen Rev to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the Valen Rev Compatible Charger →Retrospec Valen Rev Charger FAQ
What charger does the Retrospec Valen Rev use?
The documented setup uses a 48V lithium-ion battery system and a 54.6V full charging output with a CSM 4-PIN charging connection.
What voltage charger does the Retrospec Valen Rev need?
The documented 48V lithium-ion battery system uses a 54.6V charging output.
What connector does the Retrospec Valen Rev use?
The setup documented on this page uses CSM 4-PIN. CyberPika connects using CSM 4-PIN.
Do I need an adapter for the Retrospec Valen Rev?
Yes. The recommended CyberPika setup uses the CSM 4-PIN.
Is the CyberPika charger faster than the original Retrospec charger?
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and BMS.
Are there different Retrospec Valen Rev charger versions or generations?
None noted for standard Valen Rev+ variants.
Can I charge my Retrospec Valen Rev to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger + CSM 4-PIN
Retrospec Valen Rev · Valen Rev+ · 54.6V Charging
