retrospec Judd Rev 2 Charger & Compatibility Guide

✓ Connector & Specs Verified

retrospec Judd Rev 2 Charger & Compatibility Guide

The CyberPika 36V Smart E-Bike Charger + Standard 3-Pin Adapter is compatible with the retrospec Judd Rev 2 setup documented here.

This guide covers a 36V lithium-ion battery system using 42V charging and Standard 3-Pin. The CyberPika 36V Smart Charger provides 42V output at up to 4A and connects through Standard 3-Pin Adapter.

View Compatible Charger →
retrospec Judd Rev 2 e-bike

retrospec Judd Rev 2 Charger Compatibility

Specification retrospec Judd Rev 2 CyberPika
Battery system 36V lithium-ion 36V charger
Battery capacity 10Ah / 360Wh ✓ Compatible
Charging voltage 42V 42V
Connector Standard 3-Pin Standard 3-Pin Adapter
Charge levels Standard full charge 20% / 50% / 80% / 100%
Compatibility — ✓ Verified Setup

Recommended setup: CyberPika 36V Smart E-Bike Charger + Standard 3-Pin Adapter

Compatibility verification: manufacturer specifications

Why Does This Charger Work with the retrospec Judd Rev 2?

Choosing an e-bike charger requires matching both the electrical specifications and charging connector.

The documented retrospec Judd Rev 2 setup uses a 36V lithium-ion battery system. A compatible full-charge output is 42V, matching the 42V output of the CyberPika 36V Smart Charger.

The charging setup documented here uses Standard 3-Pin. CyberPika connects through Standard 3-Pin Adapter. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.

CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets. Actual charging current and charging time depend on the battery and its battery-management system.

retrospec OEM Charger vs. CyberPika

Feature retrospec OEM CyberPika
Output 42V 42V / up to 4A
Connector Standard 3-Pin Standard 3-Pin Adapter
80% Daily — ✓
100% Full ✓ ✓
50% Storage — ✓
20% Shipping — ✓

Check the Charging Port on Your Judd Rev 2

Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your retrospec Judd Rev 2 charging port with the documented setup below before ordering.

retrospec Judd Rev 2 Standard 3-Pin charging port

retrospec Judd Rev 2 charging port

Charging port documented for the compatible retrospec Judd Rev 2 setup.

Standard 3-Pin charger connector for retrospec Judd Rev 2

Compatible Standard 3-Pin connector

Connector used with the recommended CyberPika charging setup.

Important: Do not rely only on connector appearance. If your retrospec Judd Rev 2 charging port looks different, contact us before ordering.

Check Your Original Judd Rev 2 Charger Label

Your original charger label is another useful way to verify the charging requirements of your retrospec Judd Rev 2.

retrospec Judd Rev 2 original charger label

retrospec Judd Rev 2 charger label

Verify the original charger shows the compatible 42V output.

If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.

Which retrospec Judd Rev 2 Models Are Covered?

This guide applies to the Judd Rev 2 Folding Electric Bike specification and parts pages configuration documented here.

✓ 36V Battery ✓ Standard 3-Pin

Smart Charging for Everyday Judd Rev 2 Use

You don't necessarily need to charge your Judd Rev 2 to 100% after every ride. CyberPika gives you four selectable charging targets.

80%
Daily
For everyday riding when maximum available range isn't needed.
100%
Adventure
For longer rides when you want maximum available range.
50%
Storage
For periods when the bike won't be ridden regularly.
20%
Shipping
A lower state-of-charge option when appropriate.

The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.

🛡️ Worry-Free Compatibility Guarantee

If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.

If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.

View the Judd Rev 2 Compatible Charger →

retrospec Judd Rev 2 Charger FAQ

What charger does the retrospec Judd Rev 2 use?

The documented setup uses a 36V lithium-ion battery system and a 42V full charging output with a Standard 3-Pin charging connection.

What voltage charger does the retrospec Judd Rev 2 need?

The documented 36V lithium-ion battery system uses a 42V charging output.

What connector does the retrospec Judd Rev 2 use?

The setup documented on this page uses Standard 3-Pin. CyberPika connects using Standard 3-Pin Adapter.

Do I need an adapter for the retrospec Judd Rev 2?

Yes. The recommended CyberPika setup uses the Standard 3-Pin Adapter.

Can I charge my retrospec Judd Rev 2 to 80%?

Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.

Recommended for Judd Rev 2 Folding Electric Bike specification and parts pages

CyberPika 36V Smart E-Bike Charger + Standard 3-Pin Adapter

retrospec Judd Rev 2 · 42V Charging

42V Up to 4A Standard 3-Pin Standard 3-Pin Adapter 20 / 50 / 80 / 100% ✓ Verified
Shop the Judd Rev 2 Compatible Charger →