retrospec Beaumont Rev Charger & Compatibility Guide

Compatibility Review Recommended

retrospec Beaumont Rev Charger & Compatibility Guide

The CyberPika 36V Smart E-Bike Charger + Standard 3-Pin Adapter is compatible with the retrospec Beaumont Rev City setup documented here.

This guide covers a 36V lithium-ion battery system using 42V charging and Standard 3-Pin (standard 3 pin). The CyberPika 36V Smart Charger provides 42V output at up to 4A and connects through Standard 3-Pin Adapter.

View Compatible Charger →
retrospec Beaumont Rev e-bike

retrospec Beaumont Rev Charger Compatibility

Specification retrospec Beaumont Rev CyberPika
Variants City ✓ Covered
Battery system 36V lithium-ion 36V charger
Battery capacity 10.4Ah / 360Wh ✓ Compatible
Charging voltage 42V 42V
Charging current 2A OEM charger Up to 4A
Connector Standard 3-Pin (standard 3 pin) Standard 3-Pin Adapter
Charge levels Standard full charge 20% / 50% / 80% / 100%
Compatibility — ✓ Verified Setup

Recommended setup: CyberPika 36V Smart E-Bike Charger + Standard 3-Pin Adapter

Compatibility verification: manufacturer specifications

Why Does This Charger Work with the retrospec Beaumont Rev?

Choosing an e-bike charger requires matching both the electrical specifications and charging connector.

The documented retrospec Beaumont Rev setup uses a 36V lithium-ion battery system. A compatible full-charge output is 42V, matching the 42V output of the CyberPika 36V Smart Charger.

The charging setup documented here uses Standard 3-Pin (standard 3 pin). CyberPika connects through Standard 3-Pin Adapter. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.

The documented OEM charger is rated at 2A, while CyberPika can provide up to 4A. Actual charging current and charging time depend on the battery and its battery-management system. CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets.

retrospec OEM Charger vs. CyberPika

Feature retrospec OEM CyberPika
Output 42V / 2A 42V / up to 4A
Connector Standard 3-Pin (standard 3 pin) Standard 3-Pin Adapter
80% Daily — ✓
100% Full ✓ ✓
50% Storage — ✓
20% Shipping — ✓

Check the Charging Port on Your Beaumont Rev

Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your retrospec Beaumont Rev charging port with the documented setup below before ordering.

retrospec Beaumont Rev Standard 3-Pin charging port

retrospec Beaumont Rev charging port

Charging port documented for the compatible retrospec Beaumont Rev setup.

Standard 3-Pin charger connector for retrospec Beaumont Rev

Compatible Standard 3-Pin connector

Connector used with the recommended CyberPika charging setup.

Important: Refers to Beaumont Rev 3 / current city e-bike generation.. The standard Beaumont Rev runs on a 36V system with a 360Wh battery, whereas the Beaumont Rev+ City variant runs on a 48V system with a 500Wh battery.

Check Your Original Beaumont Rev Charger Label

Your original charger label is another useful way to verify the charging requirements of your retrospec Beaumont Rev.

retrospec Beaumont Rev original charger label

retrospec Beaumont Rev charger label

Documented original charging specification: 42V / 2A.

If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.

Which retrospec Beaumont Rev Models Are Covered?

This guide applies to the Beaumont Rev 3 and Beaumont Rev+ City configuration documented here.

✓ City ✓ 36V Battery ✓ Standard 3-Pin
Model / generation note: Refers to Beaumont Rev 3 / current city e-bike generation.. The standard Beaumont Rev runs on a 36V system with a 360Wh battery, whereas the Beaumont Rev+ City variant runs on a 48V system with a 500Wh battery.

Smart Charging for Everyday Beaumont Rev Use

You don't necessarily need to charge your Beaumont Rev to 100% after every ride. CyberPika gives you four selectable charging targets.

80%
Daily
For everyday riding when maximum available range isn't needed.
100%
Adventure
For longer rides when you want maximum available range.
50%
Storage
For periods when the bike won't be ridden regularly.
20%
Shipping
A lower state-of-charge option when appropriate.

The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.

🛡️ Worry-Free Compatibility Guarantee

If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.

If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.

View the Beaumont Rev Compatible Charger →

retrospec Beaumont Rev Charger FAQ

What charger does the retrospec Beaumont Rev use?

The documented setup uses a 36V lithium-ion battery system and a 42V full charging output with a Standard 3-Pin (standard 3 pin) charging connection.

What voltage charger does the retrospec Beaumont Rev need?

The documented 36V lithium-ion battery system uses a 42V charging output.

What connector does the retrospec Beaumont Rev use?

The setup documented on this page uses Standard 3-Pin (standard 3 pin). CyberPika connects using Standard 3-Pin Adapter.

Do I need an adapter for the retrospec Beaumont Rev?

Yes. The recommended CyberPika setup uses the Standard 3-Pin Adapter.

Is the CyberPika charger faster than the original retrospec charger?

The documented OEM charger is rated at 2A, while CyberPika can provide up to 4A. Actual charging current and charging time depend on the battery and BMS.

Are there different retrospec Beaumont Rev charger versions or generations?

The standard Beaumont Rev runs on a 36V system with a 360Wh battery, whereas the Beaumont Rev+ City variant runs on a 48V system with a 500Wh battery.

Can I charge my retrospec Beaumont Rev to 80%?

Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.

Recommended for Beaumont Rev 3 and Beaumont Rev+ City

CyberPika 36V Smart E-Bike Charger + Standard 3-Pin Adapter

retrospec Beaumont Rev · City · 42V Charging

42V Up to 4A Standard 3-Pin Standard 3-Pin Adapter 20 / 50 / 80 / 100% ✓ Verified
Shop the Beaumont Rev Compatible Charger →