Magicycle Commuter Charger & Compatibility Guide
Magicycle Commuter Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger + Standard 3-Pin Adapter is compatible with the Magicycle Commuter CT-1 setup documented here.
This guide covers a 48V lithium-ion battery system using 54.6V charging and Standard 3-Pin. The CyberPika 48V Smart Charger provides 54.6V output at up to 3A and connects through Standard 3-Pin Adapter.
View Compatible Charger →
Magicycle Commuter Charger Compatibility
| Specification | Magicycle Commuter | CyberPika |
|---|---|---|
| Variants | CT-1 | ✓ Covered |
| Battery system | 48V lithium-ion | 48V charger |
| Battery capacity | 15Ah | ✓ Compatible |
| Charging voltage | 54.6V | 54.6V |
| Charging current | 2A OEM charger | Up to 3A |
| Connector | Standard 3-Pin | Standard 3-Pin Adapter |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Verified Setup |
Recommended setup: CyberPika 48V Smart E-Bike Charger + Standard 3-Pin Adapter
Compatibility verification: original charger-label evidence
Why Does This Charger Work with the Magicycle Commuter?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Magicycle Commuter setup uses a 48V lithium-ion battery system. A compatible full-charge output is 54.6V, matching the 54.6V output of the CyberPika 48V Smart Charger.
The charging setup documented here uses Standard 3-Pin. CyberPika connects through Standard 3-Pin Adapter. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and its battery-management system. CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets.
Magicycle OEM Charger vs. CyberPika
| Feature | Magicycle OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 2A | 54.6V / up to 3A |
| Connector | Standard 3-Pin | Standard 3-Pin Adapter |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your Commuter
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Magicycle Commuter charging port with the documented setup below before ordering.
Magicycle Commuter charging port
Charging port documented for the compatible Magicycle Commuter setup.
Compatible Standard 3-Pin connector
Connector used with the recommended CyberPika charging setup.
Check Your Original Commuter Charger Label
Your original charger label is another useful way to verify the charging requirements of your Magicycle Commuter.
Magicycle Commuter charger label
Documented original charging specification: 54.6V / 2A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Magicycle Commuter Models Are Covered?
This guide applies to the Magicycle Commuter (CT-1) 48V model configuration documented here.
Smart Charging for Everyday Commuter Use
You don't necessarily need to charge your Commuter to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the Commuter Compatible Charger →Magicycle Commuter Charger FAQ
What charger does the Magicycle Commuter use?
The documented setup uses a 48V lithium-ion battery system and a 54.6V full charging output with a Standard 3-Pin charging connection.
What voltage charger does the Magicycle Commuter need?
The documented 48V lithium-ion battery system uses a 54.6V charging output.
What connector does the Magicycle Commuter use?
The setup documented on this page uses Standard 3-Pin. CyberPika connects using Standard 3-Pin Adapter.
Do I need an adapter for the Magicycle Commuter?
Yes. The recommended CyberPika setup uses the Standard 3-Pin Adapter.
Is the CyberPika charger faster than the original Magicycle charger?
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and BMS.
Are there different Magicycle Commuter charger versions or generations?
The charger for the Commuter outputs 54.6V 2.0A, whereas other Magicycle models use 58.8V 3.0A.
Can I charge my Magicycle Commuter to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger + Standard 3-Pin Adapter
Magicycle Commuter · CT-1 · 54.6V Charging