Lectric XPeak2 Charger & Compatibility Guide
Lectric XPeak2 Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger + JUNLEI 3015 Adapter is compatible with the Lectric XPeak2 Standard / Long-Range setup documented here.
This guide covers a 48V lithium-ion battery system using 54.6V charging and JUNLEI 3015 (3-pin). The CyberPika 48V Smart Charger provides 54.6V output at up to 3A and connects through JUNLEI 3015 Adapter.
Compatibility has also been confirmed through customer use.
View Compatible Charger →
Lectric XPeak2 Charger Compatibility
| Specification | Lectric XPeak2 | CyberPika |
|---|---|---|
| Variants | Standard / Long-Range | ✓ Covered |
| Battery system | 48V lithium-ion | 48V charger |
| Battery capacity | 15Ah or 20Ah / 720Wh or 960Wh | ✓ Compatible |
| Charging voltage | 54.6V | 54.6V |
| Charging current | 2A OEM charger | Up to 3A |
| Connector | JUNLEI 3015 (3-pin) | JUNLEI 3015 Adapter |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Customer Confirmed |
Recommended setup: CyberPika 48V Smart E-Bike Charger + JUNLEI 3015 Adapter
Compatibility verification: manufacturer specifications, physical connector verification, original charger-label evidence, customer-confirmed charging
Why Does This Charger Work with the Lectric XPeak2?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Lectric XPeak2 setup uses a 48V lithium-ion battery system. A compatible full-charge output is 54.6V, matching the 54.6V output of the CyberPika 48V Smart Charger.
The charging setup documented here uses JUNLEI 3015 (3-pin). CyberPika connects through JUNLEI 3015 Adapter. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and its battery-management system. CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets.
Lectric OEM Charger vs. CyberPika
| Feature | Lectric OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 2A | 54.6V / up to 3A |
| Connector | JUNLEI 3015 (3-pin) | JUNLEI 3015 Adapter |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your XPeak2
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Lectric XPeak2 charging port with the documented setup below before ordering.
Lectric XPeak2 charging port
Charging port documented for the compatible Lectric XPeak2 setup.
Compatible JUNLEI 3015 connector
Connector used with the recommended CyberPika charging setup.
Check Your Original XPeak2 Charger Label
Your original charger label is another useful way to verify the charging requirements of your Lectric XPeak2.
Lectric XPeak2 charger label
Documented original charging specification: 54.6V / 2A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Lectric XPeak2 Models Are Covered?
This guide applies to the Lectric XPeak 2.0 Off-Road eBike model series configuration documented here.
Smart Charging for Everyday XPeak2 Use
You don't necessarily need to charge your XPeak2 to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the XPeak2 Compatible Charger →Lectric XPeak2 Charger FAQ
What charger does the Lectric XPeak2 use?
The documented setup uses a 48V lithium-ion battery system and a 54.6V full charging output with a JUNLEI 3015 (3-pin) charging connection.
What voltage charger does the Lectric XPeak2 need?
The documented 48V lithium-ion battery system uses a 54.6V charging output.
What connector does the Lectric XPeak2 use?
The setup documented on this page uses JUNLEI 3015 (3-pin). CyberPika connects using JUNLEI 3015 Adapter.
Do I need an adapter for the Lectric XPeak2?
Yes. The recommended CyberPika setup uses the JUNLEI 3015 Adapter.
Is the CyberPika charger faster than the original Lectric charger?
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and BMS.
Are there different Lectric XPeak2 charger versions or generations?
XPeak version 2.0 uses the newer JUNLEI 3015 3-pin connector, unlike older XPeak 1.0 models which used a DC barrel plug.
Can I charge my Lectric XPeak2 to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger + JUNLEI 3015 Adapter
Lectric XPeak2 · Standard / Long-Range · 54.6V Charging