Lectric XP Trike2 Charger & Compatibility Guide
Lectric XP Trike2 Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger with JUNLEI 3015 adapter is compatible with the Lectric XP Trike2 and XP Trike2 750.
The XP Trike2 family uses a 48V lithium-ion charging system. Lectric's compatible 3-pin charger provides a 54.6V output and uses a JUNLEI 3015 connector. The CyberPika 48V Smart Charger matches this charging voltage and connects through the JUNLEI 3015 adapter.
Compatibility has also been confirmed through customer use.
View Compatible Charger →Lectric XP Trike2 Charger Compatibility
| Specification | Lectric XP Trike2 | CyberPika |
|---|---|---|
| Models | XP Trike2 / XP Trike2 750 | ✓ Both |
| Battery system | 48V lithium-ion | 48V charger |
| Charging voltage | 54.6V | 54.6V |
| Standard charging current | 2A OEM charger | Up to 3A |
| Connector | JUNLEI 3015 | JUNLEI 3015 adapter |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Confirmed |
Recommended setup: CyberPika 48V Smart E-Bike Charger + JUNLEI 3015 Adapter
Compatibility verification: Manufacturer specifications, physical connector verification, and customer-confirmed charging.
Why Does This Charger Work with the Lectric XP Trike2?
Choosing an e-bike charger requires matching both the electrical specifications and the charging connector.
Lectric specifies a 54.6V output for its compatible 3-pin charger, which matches the charging voltage required by the XP Trike2's 48V lithium-ion battery system. Lectric also identifies the connector as JUNLEI 3015.
The CyberPika 48V Smart Charger provides the same 54.6V charging voltage and pairs with a JUNLEI 3015 adapter.
The main difference is charging current and charging control. Lectric's standard charger is rated at 2A, while the CyberPika charger provides up to 3A and lets you choose how fully the battery is charged.
Lectric OEM Charger vs. CyberPika
| Feature | Lectric OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 2A | 54.6V / up to 3A |
| Connector | JUNLEI 3015 | JUNLEI 3015 adapter |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your XP Trike2
Several e-bike charging connectors can look very similar. Comparing your charging port with the verified Lectric JUNLEI 3015 connection is one of the easiest ways to double-check compatibility before ordering.
Lectric JUNLEI 3015 charging port
3-pin charging port used with compatible Lectric models including the XP Trike2.
Compatible JUNLEI 3015 connector
Connector used with compatible Lectric XP Trike2 charging ports.
Check Your Original Charger Label
Your original charger is another useful way to verify the charging requirements.
Lectric 54.6V / 2A charger label
Look for an output of 54.6V DC / 2A.
If your original charger shows a substantially different output, send us a photo of the label and charging port before using a replacement charger.
Smart Charging for Everyday XP Trike2 Use
You don't necessarily need to charge your XP Trike2 to 100% after every ride. The CyberPika charger gives you four selectable charge levels.
The charger defaults to 80% Daily Mode, so you can use partial charging without monitoring the battery and manually unplugging the charger.
Does It Work with the XP Trike2 750?
Yes. The same CyberPika 48V charger and JUNLEI 3015 adapter setup works with both models documented here.
The XP Trike2 750 uses a higher-capacity battery and is designed for longer range and more power, while retaining the compatible charging setup documented on this page.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your bike model, a photo of the charging port, and a photo of the original charger label . We'll help verify compatibility before you charge.
View the Lectric XP Trike2 Charger →Lectric XP Trike2 Charger FAQ
What charger does the Lectric XP Trike2 use?
The Lectric XP Trike2 uses a charger designed for its 48V lithium-ion battery system. Lectric's compatible 3-pin charger outputs 54.6V DC at 2A and uses a JUNLEI 3015 connector.
What voltage charger does the Lectric XP Trike2 need?
The XP Trike2 uses a 54.6V charging voltage for its 48V lithium-ion battery system.
What connector does the Lectric XP Trike2 use?
Lectric's compatible 3-pin charger uses a JUNLEI 3015 connector.
Can I use a 3A charger with the Lectric XP Trike2?
Yes. The CyberPika 48V Smart Charger provides up to 3A at 54.6V and has been customer-confirmed with the XP Trike2 when paired with the JUNLEI 3015 adapter.
Does this charger work with the XP Trike2 750?
Yes. The same CyberPika 48V Smart Charger and JUNLEI 3015 adapter setup is compatible with the Lectric XP Trike2 750 documented on this page.
Can I charge my Lectric XP Trike2 to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger + JUNLEI 3015 Adapter
XP Trike2 · XP Trike2 750