Jansno X80 Charger & Compatibility Guide
Jansno X80 Charger & Compatibility Guide
The CyberPika 52V Smart E-Bike Charger with built-in DC5521 connector is compatible with the Jansno X80 Standard / Single Battery 1000W setup documented here.
This guide covers a 52V lithium-ion battery system using 58.8V charging and DC5521. The CyberPika 52V Smart Charger provides 58.8V output at up to 3A and connects through Built-in DC5521 plug.
Compatibility has also been confirmed through customer use.
View Compatible Charger →
Jansno X80 Charger Compatibility
| Specification | Jansno X80 | CyberPika |
|---|---|---|
| Variants | Standard / Single Battery 1000W | ✓ Covered |
| Battery system | 52V lithium-ion | 52V charger |
| Battery capacity | 17Ah | ✓ Compatible |
| Charging voltage | 58.8V | 58.8V |
| Charging current | 2A OEM charger | Up to 3A |
| Connector | DC5521 | Built-in DC5521 plug |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Customer Confirmed |
Recommended setup: CyberPika 52V Smart E-Bike Charger with built-in DC5521 connector
Compatibility verification: manufacturer specifications, customer-confirmed charging
Why Does This Charger Work with the Jansno X80?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Jansno X80 setup uses a 52V lithium-ion battery system. A compatible full-charge output is 58.8V, matching the 58.8V output of the CyberPika 52V Smart Charger.
The charging setup documented here uses DC5521. CyberPika connects through Built-in DC5521 plug. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and its battery-management system. CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets.
Jansno OEM Charger vs. CyberPika
| Feature | Jansno OEM | CyberPika |
|---|---|---|
| Output | 58.8V / 2A | 58.8V / up to 3A |
| Connector | DC5521 | Built-in DC5521 plug |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your X80
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Jansno X80 charging port with the documented setup below before ordering.
Jansno X80 charging port
Charging port documented for the compatible Jansno X80 setup.
Compatible DC5521 connector
Connector used with the recommended CyberPika charging setup.
Check Your Original X80 Charger Label
Your original charger label is another useful way to verify the charging requirements of your Jansno X80.
Jansno X80 charger label
Documented original charging specification: 58.8V / 2A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Jansno X80 Models Are Covered?
This guide applies to the Jansno X80 standard single battery 52V 17Ah model variants configuration documented here.
Smart Charging for Everyday X80 Use
You don't necessarily need to charge your X80 to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the X80 Compatible Charger →Jansno X80 Charger FAQ
What charger does the Jansno X80 use?
The documented setup uses a 52V lithium-ion battery system and a 58.8V full charging output with a DC5521 charging connection.
What voltage charger does the Jansno X80 need?
The documented 52V lithium-ion battery system uses a 58.8V charging output.
What connector does the Jansno X80 use?
The setup documented on this page uses DC5521. CyberPika connects using Built-in DC5521 plug.
Do I need an adapter for the Jansno X80?
No additional adapter is required for the documented setup because the CyberPika charger uses its built-in DC5521 connector.
Is the CyberPika charger faster than the original Jansno charger?
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and BMS.
Are there different Jansno X80 charger versions or generations?
X80 Pro and X80 Max variants exist featuring dual battery systems or higher capacities, which may alter configuration details.
Can I charge my Jansno X80 to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 52V Smart E-Bike Charger with built-in DC5521 connector
Jansno X80 · Standard / Single Battery 1000W · 58.8V Charging