Heybike Mars 3.0 Charger & Compatibility Guide
Heybike Mars 3.0 Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger with built-in DC5521 connector is compatible with the Heybike Mars 3.0 documented here.
The Mars 3.0 uses a 624Wh lithium-ion battery system and Heybike specifies a 54.6V / 2A original charger. The CyberPika 48V Smart Charger provides the same 54.6V charging voltage, up to 3A current, and connects directly through its built-in 5.5 × 2.1 mm DC barrel plug.
Compatibility has also been confirmed through customer use.
View Compatible Charger →Heybike Mars 3.0 Charger Compatibility
| Specification | Heybike Mars 3.0 | CyberPika |
|---|---|---|
| Motor | 750W sustained / 1400W peak | ✓ Compatible |
| Battery | 624Wh lithium-ion | 48V charger |
| Charging voltage | 54.6V | 54.6V |
| Charging current | 2A OEM charger | Up to 3A |
| Connector | DC5521 charging port | Built-in DC5521 plug |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Customer Confirmed |
Recommended setup: CyberPika 48V Smart E-Bike Charger with built-in DC5521 connector
Compatibility verification: Manufacturer specifications, physical connector verification, and customer-confirmed charging.
Why Does This Charger Work with the Heybike Mars 3.0?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
Heybike specifies a 54.6V / 2A charger for the Mars 3.0. The CyberPika 48V Smart Charger provides the same 54.6V charging voltage with up to 3A current.
The CyberPika charger also includes a built-in 5.5 × 2.1 mm DC barrel connector (DC5521), matching the charging-port configuration verified for the Mars 3.0 documented here.
In addition to the higher available charging current, CyberPika lets you choose 20%, 50%, 80%, or 100% charge targets depending on how you plan to ride or store the bike.
Heybike OEM Charger vs. CyberPika
| Feature | Heybike OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 2A | 54.6V / up to 3A |
| Connector | DC barrel | DC5521 |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your Mars 3.0
DC barrel connectors can look very similar while using different internal dimensions. Compare your Mars 3.0 charging port with the verified setup below before ordering.
Mars 3.0 DC charging port
Round DC barrel charging port used with the compatible Mars 3.0 setup.
Compatible DC5521 connector
5.5 mm outer diameter × 2.1 mm inner diameter DC barrel plug.
Check Your Original Mars 3.0 Charger
Your original charger is another useful way to verify the bike's electrical requirements.
Heybike Mars 3.0 OEM charger specification
Heybike lists approximately 5–7 hours for a full charge with the included charger.
If the output printed on your original charger is substantially different, send us a photo of the label and charging port before using a replacement charger.
Smart Charging for Everyday Mars 3.0 Use
You don't necessarily need to charge your Mars 3.0 to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without monitoring the battery and manually unplugging the charger.
Which Mars 3.0 Model Is Covered?
This guide covers the current Heybike Mars 3.0 750W model documented here.
Heybike currently lists the Mars 3.0 with a 750W sustained rear-hub motor, up to 1400W peak output, and a 624Wh battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your bike model, a photo of the charging port, and a photo of the original charger label . We'll help verify compatibility before you charge.
View the Heybike Mars 3.0 Charger →Heybike Mars 3.0 Charger FAQ
What charger does the Heybike Mars 3.0 use?
Heybike specifies a 54.6V DC / 2A charger for the Mars 3.0.
What voltage charger does the Heybike Mars 3.0 need?
The Mars 3.0 uses a 54.6V charging output. The CyberPika 48V Smart Charger provides the same 54.6V output.
What connector does the Heybike Mars 3.0 use?
The Mars 3.0 setup documented here uses a DC5521 barrel charging connection. CyberPika's built-in plug measures 5.5 mm outer diameter × 2.1 mm inner diameter.
Do I need an adapter for the Heybike Mars 3.0?
No additional adapter is required when your Mars 3.0 uses the compatible DC5521 charging port shown on this page. The CyberPika charger has a built-in DC5521 connector.
Is the CyberPika charger faster than the original Mars 3.0 charger?
The original Mars 3.0 charger is rated at 54.6V / 2A, while the CyberPika 48V charger provides 54.6V / up to 3A. Actual charging current and charging time can vary depending on battery state and the battery-management system.
How long does the Mars 3.0 take to charge?
Heybike lists approximately 5–7 hours for a full charge using its included 2A charger.
Can I charge my Mars 3.0 to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger
Heybike Mars 3.0 750W