Heybike Mars 1.0 Charger & Compatibility Guide
Heybike Mars 1.0 Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger with 3-pin XLR adapter is compatible with the Heybike Mars 1.0 documented here.
The original Heybike Mars uses a 48V lithium-ion battery system. Heybike specifies a 54.6V / 2A Mars charger, while the CyberPika 48V Smart Charger provides the same 54.6V charging voltage with up to 3A current and connects through the compatible 3-pin XLR adapter.
Compatibility has also been confirmed through customer use.
View Compatible Charger →Heybike Mars 1.0 Charger Compatibility
| Specification | Heybike Mars 1.0 | CyberPika |
|---|---|---|
| Model | Mars 1.0 / original Mars | ✓ Confirmed |
| Motor | 750W class | — |
| Battery system | 48V lithium-ion | 48V charger |
| Charging voltage | 54.6V | 54.6V |
| Charging current | 2A OEM charger | Up to 3A |
| Connector | 3-pin XLR charging port | 3-pin XLR adapter |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Customer Confirmed |
Recommended setup: CyberPika 48V Smart E-Bike Charger + 3-Pin XLR Adapter
Compatibility verification: Heybike charger specifications, charging-port verification, original charger-label evidence, and customer-confirmed charging.
Why Does This Charger Work with the Heybike Mars 1.0?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
Heybike's current replacement-charger page specifies the original Mars charger at 54.6V / 2A. The CyberPika 48V Smart Charger supplies the same 54.6V charging voltage with up to 3A available current. :contentReference[oaicite:2]{index=2}
The Mars 1.0 setup documented here uses a 3-pin XLR charging connection. CyberPika connects through its 3-pin XLR adapter rather than the built-in DC barrel plug used with models such as the Mars 2.0 and Mars 3.0.
CyberPika also gives you selectable 20%, 50%, 80%, and 100% charge targets rather than only charging to full.
Heybike OEM Charger vs. CyberPika
| Feature | Heybike OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 2A | 54.6V / up to 3A |
| Connector | 3-pin XLR | 3-pin XLR adapter |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your Mars 1.0
The original Mars uses a different charging connection from the DC barrel ports found on later Mars models. Compare your charging port with the verified 3-pin XLR setup below before ordering.
Mars 1.0 3-pin XLR charging port
Three-hole XLR-style charging port documented on the original Heybike Mars.
Compatible 3-pin XLR connector
XLR-style plug used with the compatible CyberPika adapter.
Check Your Original Mars 1.0 Charger Label
Your original charger label is another useful way to verify the charging requirements of your specific bike.
Heybike Mars 1.0 charger label
Heybike currently specifies the Mars replacement charger at 54.6V DC / 2A. :contentReference[oaicite:3]{index=3}
If your charger label or charging port differs substantially from these examples, send us photos before using a replacement charger.
Smart Charging for Everyday Mars 1.0 Use
The CyberPika charger lets you choose a charge target depending on whether you're riding normally, preparing for a longer ride, or storing the bike.
The charger defaults to 80% Daily Mode, so partial charging can be used without continuously watching the battery and manually unplugging it.
Is This Guide for the Original Heybike Mars?
Yes. This guide is specifically for the original Mars / Mars 1.0 configuration documented with the 3-pin XLR charging port.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your bike model, a photo of the charging port, and a photo of the original charger label . We'll help verify compatibility before you charge.
View the Heybike Mars 1.0 Charger →Heybike Mars 1.0 Charger FAQ
What charger does the original Heybike Mars use?
Heybike currently specifies the Mars charger at 54.6V DC / 2A. The original Mars setup documented here uses a 3-pin XLR charging connection. :contentReference[oaicite:4]{index=4}
What voltage charger does the Heybike Mars 1.0 need?
The Mars 1.0 uses a 48V lithium-ion battery system and requires a 54.6V charging output.
What connector does the Heybike Mars 1.0 use?
The original Mars documented here uses a 3-pin XLR charging connector.
Do I need an adapter for the Heybike Mars 1.0?
Yes. The CyberPika charger uses its built-in DC output and connects to the original Mars through the compatible 3-pin XLR adapter.
Is the CyberPika charger faster than the original Mars charger?
Heybike specifies the original Mars charger at 54.6V / 2A, while the CyberPika 48V charger provides 54.6V / up to 3A. Actual current and charging time depend on battery state and the battery-management system.
Is the Mars 1.0 charger the same as the Mars 2.0 charger?
No. The original Mars documented here uses a 3-pin XLR charging connection, while the Mars 2.0 compatibility setup we've documented uses a DC barrel connector. Verify your exact model before ordering.
Can I charge my Heybike Mars to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger + 3-Pin XLR Adapter
Original Heybike Mars / Mars 1.0