Heybike Mars 1.0 Charger & Compatibility Guide
Heybike Mars 1.0 Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger + XLR Adapter is compatible with the Heybike Mars 1.0 1.0 setup documented here.
This guide covers a 48V lithium-ion battery system using 54.6V charging and XLR 3-pin (3-pin male XLR). The CyberPika 48V Smart Charger provides 54.6V output at up to 3A and connects through XLR Adapter.
Compatibility has also been confirmed through customer use.
View Compatible Charger →
Heybike Mars 1.0 Charger Compatibility
| Specification | Heybike Mars 1.0 | CyberPika |
|---|---|---|
| Variants | 1.0 | ✓ Covered |
| Battery system | 48V lithium-ion | 48V charger |
| Battery capacity | 12.5Ah / 600Wh | ✓ Compatible |
| Charging voltage | 54.6V | 54.6V |
| Charging current | 2A OEM charger | Up to 3A |
| Connector | XLR 3-pin (3-pin male XLR) | XLR Adapter |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Customer Confirmed |
Recommended setup: CyberPika 48V Smart E-Bike Charger + XLR Adapter
Compatibility verification: manufacturer specifications, physical connector verification, original charger-label evidence, customer-confirmed charging
Why Does This Charger Work with the Heybike Mars 1.0?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Heybike Mars 1.0 setup uses a 48V lithium-ion battery system. A compatible full-charge output is 54.6V, matching the 54.6V output of the CyberPika 48V Smart Charger.
The charging setup documented here uses XLR 3-pin (3-pin male XLR). CyberPika connects through XLR Adapter. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and its battery-management system. CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets.
Heybike OEM Charger vs. CyberPika
| Feature | Heybike OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 2A | 54.6V / up to 3A |
| Connector | XLR 3-pin (3-pin male XLR) | XLR Adapter |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your Mars 1.0
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Heybike Mars 1.0 charging port with the documented setup below before ordering.
Heybike Mars 1.0 charging port
Charging port documented for the compatible Heybike Mars 1.0 setup.
Compatible XLR 3-pin connector
Connector used with the recommended CyberPika charging setup.
Check Your Original Mars 1.0 Charger Label
Your original charger label is another useful way to verify the charging requirements of your Heybike Mars 1.0.
Heybike Mars 1.0 charger label
Documented original charging specification: 54.6V / 2A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Heybike Mars 1.0 Models Are Covered?
This guide applies to the Heybike Mars 1.0 e-bike charging specifications and compatibility configuration documented here.
Smart Charging for Everyday Mars 1.0 Use
You don't necessarily need to charge your Mars 1.0 to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the Mars 1.0 Compatible Charger →Heybike Mars 1.0 Charger FAQ
What charger does the Heybike Mars 1.0 use?
The documented setup uses a 48V lithium-ion battery system and a 54.6V full charging output with a XLR 3-pin (3-pin male XLR) charging connection.
What voltage charger does the Heybike Mars 1.0 need?
The documented 48V lithium-ion battery system uses a 54.6V charging output.
What connector does the Heybike Mars 1.0 use?
The setup documented on this page uses XLR 3-pin (3-pin male XLR). CyberPika connects using XLR Adapter.
Do I need an adapter for the Heybike Mars 1.0?
Yes. The recommended CyberPika setup uses the XLR Adapter.
Is the CyberPika charger faster than the original Heybike charger?
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and BMS.
Are there different Heybike Mars 1.0 charger versions or generations?
Ensure differentiation from Mars 2.0 or newer iterations which may specify different components.
Can I charge my Heybike Mars 1.0 to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger + XLR Adapter
Heybike Mars 1.0 · 1.0 · 54.6V Charging