Gotrax Ranger Charger & Compatibility Guide
Gotrax Ranger Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger with built-in DC5521 connector is compatible with the Gotrax Ranger setup documented here.
This guide covers a 48V lithium-ion battery system using 54.6V charging and DC5521 (2.1mm x 5.5mm barrel plug). The CyberPika 48V Smart Charger provides 54.6V output at up to 3A and connects through Built-in DC5521 plug.
View Compatible Charger →
Gotrax Ranger Charger Compatibility
| Specification | Gotrax Ranger | CyberPika |
|---|---|---|
| Battery system | 48V lithium-ion | 48V charger |
| Battery capacity | 10.4Ah | ✓ Compatible |
| Charging voltage | 54.6V | 54.6V |
| Charging current | 2A OEM charger | Up to 3A |
| Connector | DC5521 (2.1mm x 5.5mm barrel plug) | Built-in DC5521 plug |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Verified Setup |
Recommended setup: CyberPika 48V Smart E-Bike Charger with built-in DC5521 connector
Compatibility verification: manufacturer specifications, physical connector verification, original charger-label evidence
Why Does This Charger Work with the Gotrax Ranger?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Gotrax Ranger setup uses a 48V lithium-ion battery system. A compatible full-charge output is 54.6V, matching the 54.6V output of the CyberPika 48V Smart Charger.
The charging setup documented here uses DC5521 (2.1mm x 5.5mm barrel plug). CyberPika connects through Built-in DC5521 plug. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and its battery-management system. CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets.
Gotrax OEM Charger vs. CyberPika
| Feature | Gotrax OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 2A | 54.6V / up to 3A |
| Connector | DC5521 (2.1mm x 5.5mm barrel plug) | Built-in DC5521 plug |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your Ranger
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Gotrax Ranger charging port with the documented setup below before ordering.
Gotrax Ranger charging port
Charging port documented for the compatible Gotrax Ranger setup.
Compatible DC5521 connector
Connector used with the recommended CyberPika charging setup.
Check Your Original Ranger Charger Label
Your original charger label is another useful way to verify the charging requirements of your Gotrax Ranger.
Gotrax Ranger charger label
Documented original charging specification: 54.6V / 2A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Gotrax Ranger Models Are Covered?
This guide applies to the Gotrax Ranger Electric Bike and official 48V 2A charger accessories page configuration documented here.
Smart Charging for Everyday Ranger Use
You don't necessarily need to charge your Ranger to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the Ranger Compatible Charger →Gotrax Ranger Charger FAQ
What charger does the Gotrax Ranger use?
The documented setup uses a 48V lithium-ion battery system and a 54.6V full charging output with a DC5521 (2.1mm x 5.5mm barrel plug) charging connection.
What voltage charger does the Gotrax Ranger need?
The documented 48V lithium-ion battery system uses a 54.6V charging output.
What connector does the Gotrax Ranger use?
The setup documented on this page uses DC5521 (2.1mm x 5.5mm barrel plug). CyberPika connects using Built-in DC5521 plug.
Do I need an adapter for the Gotrax Ranger?
No additional adapter is required for the documented setup because the CyberPika charger uses its built-in DC5521 connector.
Is the CyberPika charger faster than the original Gotrax charger?
The documented OEM charger is rated at 2A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and BMS.
Can I charge my Gotrax Ranger to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger with built-in DC5521 connector
Gotrax Ranger · 54.6V Charging
