EDIKANI ED-SN01 Charger & Compatibility Guide
EDIKANI ED-SN01 Charger & Compatibility Guide
The CyberPika 36V Smart E-Bike Charger with built-in DC5521 connector is compatible with the EDIKANI ED-SN01 setup documented here.
This guide covers a 36V lithium-ion battery system using 42V charging and DC5521. The CyberPika 36V Smart Charger provides 42V output at up to 4A and connects through Built-in DC5521 plug.
View Compatible Charger →
EDIKANI ED-SN01 Charger Compatibility
| Specification | EDIKANI ED-SN01 | CyberPika |
|---|---|---|
| Battery system | 36V lithium-ion | 36V charger |
| Battery capacity | 1104Wh | ✓ Compatible |
| Charging voltage | 42V | 42V |
| Charging current | 2A OEM charger | Up to 4A |
| Connector | DC5521 | Built-in DC5521 plug |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Verified Setup |
Recommended setup: CyberPika 36V Smart E-Bike Charger with built-in DC5521 connector
Compatibility verification: manufacturer specifications, original charger-label evidence
Why Does This Charger Work with the EDIKANI ED-SN01?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented EDIKANI ED-SN01 setup uses a 36V lithium-ion battery system. A compatible full-charge output is 42V, matching the 42V output of the CyberPika 36V Smart Charger.
The charging setup documented here uses DC5521. CyberPika connects through Built-in DC5521 plug. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger is rated at 2A, while CyberPika can provide up to 4A. Actual charging current and charging time depend on the battery and its battery-management system. CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets.
EDIKANI OEM Charger vs. CyberPika
| Feature | EDIKANI OEM | CyberPika |
|---|---|---|
| Output | 42V / 2A | 42V / up to 4A |
| Connector | DC5521 | Built-in DC5521 plug |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your ED-SN01
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your EDIKANI ED-SN01 charging port with the documented setup below before ordering.
EDIKANI ED-SN01 charging port
Charging port documented for the compatible EDIKANI ED-SN01 setup.
Compatible DC5521 connector
Connector used with the recommended CyberPika charging setup.
Check Your Original ED-SN01 Charger Label
Your original charger label is another useful way to verify the charging requirements of your EDIKANI ED-SN01.
EDIKANI ED-SN01 charger label
Documented original charging specification: 42V / 2A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which EDIKANI ED-SN01 Models Are Covered?
This guide applies to the EDIKANI ED-S01 48V 23Ah variant configuration documented here.
Smart Charging for Everyday ED-SN01 Use
You don't necessarily need to charge your ED-SN01 to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the ED-SN01 Compatible Charger →EDIKANI ED-SN01 Charger FAQ
What charger does the EDIKANI ED-SN01 use?
The documented setup uses a 36V lithium-ion battery system and a 42V full charging output with a DC5521 charging connection.
What voltage charger does the EDIKANI ED-SN01 need?
The documented 36V lithium-ion battery system uses a 42V charging output.
What connector does the EDIKANI ED-SN01 use?
The setup documented on this page uses DC5521. CyberPika connects using Built-in DC5521 plug.
Do I need an adapter for the EDIKANI ED-SN01?
No additional adapter is required for the documented setup because the CyberPika charger uses its built-in DC5521 connector.
Is the CyberPika charger faster than the original EDIKANI charger?
The documented OEM charger is rated at 2A, while CyberPika can provide up to 4A. Actual charging current and charging time depend on the battery and BMS.
Can I charge my EDIKANI ED-SN01 to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 36V Smart E-Bike Charger with built-in DC5521 connector
EDIKANI ED-SN01 · 42V Charging