Denago City2 Charger & Compatibility Guide
Denago City2 Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger + Standard 3-Pin Adapter is compatible with the Denago City2 setup documented here.
This guide covers a 48V lithium-ion battery system using 54.6V charging and Standard 3-Pin. The CyberPika 48V Smart Charger provides 54.6V output at up to 3A and connects through Standard 3-Pin Adapter.
Compatibility has also been confirmed through customer use.
View Compatible Charger →
Denago City2 Charger Compatibility
| Specification | Denago City2 | CyberPika |
|---|---|---|
| Battery system | 48V lithium-ion | 48V charger |
| Charging voltage | 54.6V | 54.6V |
| Charging current | 3A OEM charger | Up to 3A |
| Connector | Standard 3-Pin | Standard 3-Pin Adapter |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Customer Confirmed |
Recommended setup: CyberPika 48V Smart E-Bike Charger + Standard 3-Pin Adapter
Compatibility verification: manufacturer specifications, original charger-label evidence, customer-confirmed charging
Why Does This Charger Work with the Denago City2?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Denago City2 setup uses a 48V lithium-ion battery system. A compatible full-charge output is 54.6V, matching the 54.6V output of the CyberPika 48V Smart Charger.
The charging setup documented here uses Standard 3-Pin. CyberPika connects through Standard 3-Pin Adapter. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger and CyberPika both provide up to about 3A maximum charging current. CyberPika adds selectable 20%, 50%, 80%, and 100% charge targets.
Denago OEM Charger vs. CyberPika
| Feature | Denago OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 3A | 54.6V / up to 3A |
| Connector | Standard 3-Pin | Standard 3-Pin Adapter |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your City2
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Denago City2 charging port with the documented setup below before ordering.
Denago City2 charging port
Charging port documented for the compatible Denago City2 setup.
Compatible Standard 3-Pin connector
Connector used with the recommended CyberPika charging setup.
Check Your Original City2 Charger Label
Your original charger label is another useful way to verify the charging requirements of your Denago City2.
Denago City2 charger label
Documented original charging specification: 54.6V / 3A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Denago City2 Models Are Covered?
This guide applies to the City 2 (E13A/E18A) configuration documented here.
Smart Charging for Everyday City2 Use
You don't necessarily need to charge your City2 to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the City2 Compatible Charger →Denago City2 Charger FAQ
What charger does the Denago City2 use?
The documented setup uses a 48V lithium-ion battery system and a 54.6V full charging output with a Standard 3-Pin charging connection.
What voltage charger does the Denago City2 need?
The documented 48V lithium-ion battery system uses a 54.6V charging output.
What connector does the Denago City2 use?
The setup documented on this page uses Standard 3-Pin. CyberPika connects using Standard 3-Pin Adapter.
Do I need an adapter for the Denago City2?
Yes. The recommended CyberPika setup uses the Standard 3-Pin Adapter.
Is the CyberPika charger faster than the original Denago charger?
The documented OEM charger and CyberPika are both rated around 3A maximum current. Actual charging behavior depends on the battery and BMS.
Can I charge my Denago City2 to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger + Standard 3-Pin Adapter
Denago City2 · 54.6V Charging