Ariel Rider Grizzly Gen 3 Charger & Compatibility Guide
Ariel Rider Grizzly Gen 3 Charger & Compatibility Guide
The CyberPika 52V Smart E-Bike Charger + ST3 Adapter is compatible with the Ariel Rider Grizzly Gen 3 52V setup documented here.
This guide covers a 52V lithium-ion battery system using 58.8V charging and ST3 (Small 3 pin (ST3)). The CyberPika 52V Smart Charger provides 58.8V output at up to 3A and connects through ST3 Adapter.
Compatibility has also been confirmed through customer use.
View Compatible Charger →
Ariel Rider Grizzly Gen 3 Charger Compatibility
| Specification | Ariel Rider Grizzly Gen 3 | CyberPika |
|---|---|---|
| Variants | 52V | ✓ Covered |
| Battery system | 52V lithium-ion | 52V charger |
| Battery capacity | 20Ah / 15Ah | ✓ Compatible |
| Charging voltage | 58.8V | 58.8V |
| Charging current | 4A OEM charger | Up to 3A |
| Connector | ST3 (Small 3 pin (ST3)) | ST3 Adapter |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Customer Confirmed |
Recommended setup: CyberPika 52V Smart E-Bike Charger + ST3 Adapter
Compatibility verification: manufacturer specifications, physical connector verification, original charger-label evidence, customer-confirmed charging
Why Does This Charger Work with the Ariel Rider Grizzly Gen 3?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Ariel Rider Grizzly Gen 3 setup uses a 52V lithium-ion battery system. A compatible full-charge output is 58.8V, matching the 58.8V output of the CyberPika 52V Smart Charger.
The charging setup documented here uses ST3 (Small 3 pin (ST3)). CyberPika connects through ST3 Adapter. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger is rated at 4A, while CyberPika provides up to 3A. CyberPika's main advantage for this setup is selectable 20%, 50%, 80%, and 100% smart charging rather than a higher maximum charging current.
Ariel Rider OEM Charger vs. CyberPika
| Feature | Ariel Rider OEM | CyberPika |
|---|---|---|
| Output | 58.8V / 4A | 58.8V / up to 3A |
| Connector | ST3 (Small 3 pin (ST3)) | ST3 Adapter |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your Grizzly Gen 3
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Ariel Rider Grizzly Gen 3 charging port with the documented setup below before ordering.
Ariel Rider Grizzly Gen 3 charging port
Charging port documented for the compatible Ariel Rider Grizzly Gen 3 setup.
Compatible ST3 connector
Connector used with the recommended CyberPika charging setup.
Check Your Original Grizzly Gen 3 Charger Label
Your original charger label is another useful way to verify the charging requirements of your Ariel Rider Grizzly Gen 3.
Ariel Rider Grizzly Gen 3 charger label
Documented original charging specification: 58.8V / 4A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Ariel Rider Grizzly Gen 3 Models Are Covered?
This guide applies to the Ariel Rider Grizzly Gen 3 52V e-bike model utilizing ST3 charging ports. configuration documented here.
Smart Charging for Everyday Grizzly Gen 3 Use
You don't necessarily need to charge your Grizzly Gen 3 to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the Grizzly Gen 3 Compatible Charger →Ariel Rider Grizzly Gen 3 Charger FAQ
What charger does the Ariel Rider Grizzly Gen 3 use?
The documented setup uses a 52V lithium-ion battery system and a 58.8V full charging output with a ST3 (Small 3 pin (ST3)) charging connection.
What voltage charger does the Ariel Rider Grizzly Gen 3 need?
The documented 52V lithium-ion battery system uses a 58.8V charging output.
What connector does the Ariel Rider Grizzly Gen 3 use?
The setup documented on this page uses ST3 (Small 3 pin (ST3)). CyberPika connects using ST3 Adapter.
Do I need an adapter for the Ariel Rider Grizzly Gen 3?
Yes. The recommended CyberPika setup uses the ST3 Adapter.
Is the CyberPika charger faster than the original Ariel Rider charger?
No. The documented OEM charger is rated at 4A, while CyberPika provides up to 3A. CyberPika's advantage is selectable smart charge levels rather than higher maximum current.
Are there different Ariel Rider Grizzly Gen 3 charger versions or generations?
Earlier Grizzly generations (Gen 2) used different charging connectors (Barrel Pin / XLR), whereas Gen 3 uses the ST3 charging port.
Can I charge my Ariel Rider Grizzly Gen 3 to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 52V Smart E-Bike Charger + ST3 Adapter
Ariel Rider Grizzly Gen 3 · 52V · 58.8V Charging