ADO Air 30 Ultra Charger & Compatibility Guide

✓ Connector & Specs Verified

ADO Air 30 Ultra Charger & Compatibility Guide

The CyberPika 36V Smart E-Bike Charger + DC5525 Adapter is compatible with the ADO Air 30 Ultra Ultra setup documented here.

This guide covers a 36V lithium-ion battery system using 42V charging and DC5525. The CyberPika 36V Smart Charger provides 42V output at up to 4A and connects through DC5525 Adapter.

View Compatible Charger →
ADO Air 30 Ultra e-bike

ADO Air 30 Ultra Charger Compatibility

Specification ADO Air 30 Ultra CyberPika
Variants Ultra ✓ Covered
Battery system 36V lithium-ion 36V charger
Battery capacity 10 Ah / 370Wh ✓ Compatible
Charging voltage 42V 42V
Charging current 2A OEM charger Up to 4A
Connector DC5525 DC5525 Adapter
Charge levels Standard full charge 20% / 50% / 80% / 100%
Compatibility — ✓ Verified Setup

Recommended setup: CyberPika 36V Smart E-Bike Charger + DC5525 Adapter

Compatibility verification: manufacturer specifications, physical connector verification, original charger-label evidence

Why Does This Charger Work with the ADO Air 30 Ultra?

Choosing an e-bike charger requires matching both the electrical specifications and charging connector.

The documented ADO Air 30 Ultra setup uses a 36V lithium-ion battery system. A compatible full-charge output is 42V, matching the 42V output of the CyberPika 36V Smart Charger.

The charging setup documented here uses DC5525. CyberPika connects through DC5525 Adapter. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.

The documented OEM charger is rated at 2A, while CyberPika can provide up to 4A. Actual charging current and charging time depend on the battery and its battery-management system. CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets.

ADO OEM Charger vs. CyberPika

Feature ADO OEM CyberPika
Output 42V / 2A 42V / up to 4A
Connector DC5525 DC5525 Adapter
80% Daily — ✓
100% Full ✓ ✓
50% Storage — ✓
20% Shipping — ✓

Check the Charging Port on Your Air 30 Ultra

Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your ADO Air 30 Ultra charging port with the documented setup below before ordering.

ADO Air 30 Ultra DC5525 charging port

ADO Air 30 Ultra charging port

Charging port documented for the compatible ADO Air 30 Ultra setup.

DC5525 charger connector for ADO Air 30 Ultra

Compatible DC5525 connector

Connector used with the recommended CyberPika charging setup.

Important: Air 30 Ultra current release generation.. Some ADO models use different connectors or chargers (e.g. Air 20s/Pro/Ultra 2026 models are noted as incompatible with the older 5.5 x 2.5mm chargers).

Check Your Original Air 30 Ultra Charger Label

Your original charger label is another useful way to verify the charging requirements of your ADO Air 30 Ultra.

ADO Air 30 Ultra original charger label

ADO Air 30 Ultra charger label

Documented original charging specification: 42V / 2A.

If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.

Which ADO Air 30 Ultra Models Are Covered?

This guide applies to the ADO Air 30 Ultra city electric bike configuration documented here.

✓ Ultra ✓ 36V Battery ✓ DC5525
Model / generation note: Air 30 Ultra current release generation.. Some ADO models use different connectors or chargers (e.g. Air 20s/Pro/Ultra 2026 models are noted as incompatible with the older 5.5 x 2.5mm chargers).

Smart Charging for Everyday Air 30 Ultra Use

You don't necessarily need to charge your Air 30 Ultra to 100% after every ride. CyberPika gives you four selectable charging targets.

80%
Daily
For everyday riding when maximum available range isn't needed.
100%
Adventure
For longer rides when you want maximum available range.
50%
Storage
For periods when the bike won't be ridden regularly.
20%
Shipping
A lower state-of-charge option when appropriate.

The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.

🛡️ Worry-Free Compatibility Guarantee

If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.

If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.

View the Air 30 Ultra Compatible Charger →

ADO Air 30 Ultra Charger FAQ

What charger does the ADO Air 30 Ultra use?

The documented setup uses a 36V lithium-ion battery system and a 42V full charging output with a DC5525 charging connection.

What voltage charger does the ADO Air 30 Ultra need?

The documented 36V lithium-ion battery system uses a 42V charging output.

What connector does the ADO Air 30 Ultra use?

The setup documented on this page uses DC5525. CyberPika connects using DC5525 Adapter.

Do I need an adapter for the ADO Air 30 Ultra?

Yes. The recommended CyberPika setup uses the DC5525 Adapter.

Is the CyberPika charger faster than the original ADO charger?

The documented OEM charger is rated at 2A, while CyberPika can provide up to 4A. Actual charging current and charging time depend on the battery and BMS.

Are there different ADO Air 30 Ultra charger versions or generations?

Some ADO models use different connectors or chargers (e.g. Air 20s/Pro/Ultra 2026 models are noted as incompatible with the older 5.5 x 2.5mm chargers).

Can I charge my ADO Air 30 Ultra to 80%?

Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.

Recommended for ADO Air 30 Ultra city electric bike

CyberPika 36V Smart E-Bike Charger + DC5525 Adapter

ADO Air 30 Ultra · Ultra · 42V Charging

42V Up to 4A DC5525 DC5525 Adapter 20 / 50 / 80 / 100% ✓ Verified
Shop the Air 30 Ultra Compatible Charger →