Addmotor M-5500 Charger & Compatibility Guide
Addmotor M-5500 Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger + XLR Adapter is compatible with the Addmotor M-5500 MOTAN M-5500 setup documented here.
This guide covers a 48V lithium-ion battery system using 54.6V charging and XLR 3-pin (3-Pin XLR). The CyberPika 48V Smart Charger provides 54.6V output at up to 3A and connects through XLR Adapter.
View Compatible Charger →
Addmotor M-5500 Charger Compatibility
| Specification | Addmotor M-5500 | CyberPika |
|---|---|---|
| Variants | MOTAN M-5500 | ✓ Covered |
| Battery system | 48V lithium-ion | 48V charger |
| Battery capacity | 17.5Ah | ✓ Compatible |
| Charging voltage | 54.6V | 54.6V |
| Charging current | 2.5A OEM charger | Up to 3A |
| Connector | XLR 3-pin (3-Pin XLR) | XLR Adapter |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Verified Setup |
Recommended setup: CyberPika 48V Smart E-Bike Charger + XLR Adapter
Compatibility verification: manufacturer specifications
Why Does This Charger Work with the Addmotor M-5500?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Addmotor M-5500 setup uses a 48V lithium-ion battery system. A compatible full-charge output is 54.6V, matching the 54.6V output of the CyberPika 48V Smart Charger.
The charging setup documented here uses XLR 3-pin (3-Pin XLR). CyberPika connects through XLR Adapter. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger is rated at 2.5A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and its battery-management system. CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets.
Addmotor OEM Charger vs. CyberPika
| Feature | Addmotor OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 2.5A | 54.6V / up to 3A |
| Connector | XLR 3-pin (3-Pin XLR) | XLR Adapter |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your M-5500
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Addmotor M-5500 charging port with the documented setup below before ordering.
Addmotor M-5500 charging port
Charging port documented for the compatible Addmotor M-5500 setup.
Compatible XLR 3-pin connector
Connector used with the recommended CyberPika charging setup.
Check Your Original M-5500 Charger Label
Your original charger label is another useful way to verify the charging requirements of your Addmotor M-5500.
Addmotor M-5500 charger label
Documented original charging specification: 54.6V / 2.5A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Addmotor M-5500 Models Are Covered?
This guide applies to the Addmotor M-5500 All-Terrain Electric Mountain Bike official specifications and compatible aftermarket accessories. configuration documented here.
Smart Charging for Everyday M-5500 Use
You don't necessarily need to charge your M-5500 to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the M-5500 Compatible Charger →Addmotor M-5500 Charger FAQ
What charger does the Addmotor M-5500 use?
The documented setup uses a 48V lithium-ion battery system and a 54.6V full charging output with a XLR 3-pin (3-Pin XLR) charging connection.
What voltage charger does the Addmotor M-5500 need?
The documented 48V lithium-ion battery system uses a 54.6V charging output.
What connector does the Addmotor M-5500 use?
The setup documented on this page uses XLR 3-pin (3-Pin XLR). CyberPika connects using XLR Adapter.
Do I need an adapter for the Addmotor M-5500?
Yes. The recommended CyberPika setup uses the XLR Adapter.
Is the CyberPika charger faster than the original Addmotor charger?
The documented OEM charger is rated at 2.5A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and BMS.
Are there different Addmotor M-5500 charger versions or generations?
None noted in manufacturer specifications regarding sub-variants for charging ports.
Can I charge my Addmotor M-5500 to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger + XLR Adapter
Addmotor M-5500 · MOTAN M-5500 · 54.6V Charging