Addmotor M-350 Charger & Compatibility Guide
Addmotor M-350 Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger with built-in XLR 3-pin connector is compatible with the Addmotor M-350 MOTAN M-350 / Triketan M-350 setup documented here.
This guide covers a 48V lithium-ion battery system using 54.6V charging and XLR 3-pin (3-pin XLR). The CyberPika 48V Smart Charger provides 54.6V output at up to 3A and connects through Built-in XLR 3-pin plug.
View Compatible Charger →
Addmotor M-350 Charger Compatibility
| Specification | Addmotor M-350 | CyberPika |
|---|---|---|
| Variants | MOTAN M-350 / Triketan M-350 | ✓ Covered |
| Battery system | 48V lithium-ion | 48V charger |
| Battery capacity | 10.4 ah (2018 model) / 20 ah (2023 version) / 499.2 wh | ✓ Compatible |
| Charging voltage | 54.6V | 54.6V |
| Charging current | 2.5A OEM charger | Up to 3A |
| Connector | XLR 3-pin (3-pin XLR) | Built-in XLR 3-pin plug |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Verified Setup |
Recommended setup: CyberPika 48V Smart E-Bike Charger with built-in XLR 3-pin connector
Compatibility verification: original charger-label evidence
Why Does This Charger Work with the Addmotor M-350?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Addmotor M-350 setup uses a 48V lithium-ion battery system. A compatible full-charge output is 54.6V, matching the 54.6V output of the CyberPika 48V Smart Charger.
The charging setup documented here uses XLR 3-pin (3-pin XLR). CyberPika connects through Built-in XLR 3-pin plug. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
The documented OEM charger is rated at 2.5A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and its battery-management system. CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets.
Addmotor OEM Charger vs. CyberPika
| Feature | Addmotor OEM | CyberPika |
|---|---|---|
| Output | 54.6V / 2.5A | 54.6V / up to 3A |
| Connector | XLR 3-pin (3-pin XLR) | Built-in XLR 3-pin plug |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your M-350
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Addmotor M-350 charging port with the documented setup below before ordering.
Addmotor M-350 charging port
Charging port documented for the compatible Addmotor M-350 setup.
Compatible XLR 3-pin connector
Connector used with the recommended CyberPika charging setup.
Check Your Original M-350 Charger Label
Your original charger label is another useful way to verify the charging requirements of your Addmotor M-350.
Addmotor M-350 charger label
Documented original charging specification: 54.6V / 2.5A.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Addmotor M-350 Models Are Covered?
This guide applies to the Model specific specifications across early (2018) and updated generations configuration documented here.
Smart Charging for Everyday M-350 Use
You don't necessarily need to charge your M-350 to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the M-350 Compatible Charger →Addmotor M-350 Charger FAQ
What charger does the Addmotor M-350 use?
The documented setup uses a 48V lithium-ion battery system and a 54.6V full charging output with a XLR 3-pin (3-pin XLR) charging connection.
What voltage charger does the Addmotor M-350 need?
The documented 48V lithium-ion battery system uses a 54.6V charging output.
What connector does the Addmotor M-350 use?
The setup documented on this page uses XLR 3-pin (3-pin XLR). CyberPika connects using Built-in XLR 3-pin plug.
Do I need an adapter for the Addmotor M-350?
No additional adapter is required for the documented setup because the CyberPika charger uses its built-in XLR 3-pin connector.
Is the CyberPika charger faster than the original Addmotor charger?
The documented OEM charger is rated at 2.5A, while CyberPika can provide up to 3A. Actual charging current and charging time depend on the battery and BMS.
Are there different Addmotor M-350 charger versions or generations?
Battery capacity and physical design changed across model years (e.g., 2018 model vs 2022/2023 versions)
Can I charge my Addmotor M-350 to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger with built-in XLR 3-pin connector
Addmotor M-350 · MOTAN M-350 / Triketan M-350 · 54.6V Charging