Addmotor M-150 Charger & Compatibility Guide
Addmotor M-150 Charger & Compatibility Guide
The CyberPika 48V Smart E-Bike Charger with built-in XLR 3-pin connector is compatible with the Addmotor M-150 MOTAN M-150 setup documented here.
This guide covers a 48V lithium-ion battery system using 54.6V charging and XLR 3-pin (3-Pin XLR). The CyberPika 48V Smart Charger provides 54.6V output at up to 3A and connects through Built-in XLR 3-pin plug.
View Compatible Charger →
Addmotor M-150 Charger Compatibility
| Specification | Addmotor M-150 | CyberPika |
|---|---|---|
| Variants | MOTAN M-150 | ✓ Covered |
| Battery system | 48V lithium-ion | 48V charger |
| Charging voltage | 54.6V | 54.6V |
| Connector | XLR 3-pin (3-Pin XLR) | Built-in XLR 3-pin plug |
| Charge levels | Standard full charge | 20% / 50% / 80% / 100% |
| Compatibility | — | ✓ Verified Setup |
Recommended setup: CyberPika 48V Smart E-Bike Charger with built-in XLR 3-pin connector
Compatibility verification: original charger-label evidence
Why Does This Charger Work with the Addmotor M-150?
Choosing an e-bike charger requires matching both the electrical specifications and charging connector.
The documented Addmotor M-150 setup uses a 48V lithium-ion battery system. A compatible full-charge output is 54.6V, matching the 54.6V output of the CyberPika 48V Smart Charger.
The charging setup documented here uses XLR 3-pin (3-Pin XLR). CyberPika connects through Built-in XLR 3-pin plug. Connector shape, pin arrangement, and electrical configuration should all be verified before charging.
CyberPika also adds selectable 20%, 50%, 80%, and 100% charge targets. Actual charging current and charging time depend on the battery and its battery-management system.
Addmotor OEM Charger vs. CyberPika
| Feature | Addmotor OEM | CyberPika |
|---|---|---|
| Output | 54.6V | 54.6V / up to 3A |
| Connector | XLR 3-pin (3-Pin XLR) | Built-in XLR 3-pin plug |
| 80% Daily | — | ✓ |
| 100% Full | ✓ | ✓ |
| 50% Storage | — | ✓ |
| 20% Shipping | — | ✓ |
Check the Charging Port on Your M-150
Charging connectors can look similar while using different dimensions, pin arrangements, or wiring. Compare your Addmotor M-150 charging port with the documented setup below before ordering.
Addmotor M-150 charging port
Charging port documented for the compatible Addmotor M-150 setup.
Compatible XLR 3-pin connector
Connector used with the recommended CyberPika charging setup.
Check Your Original M-150 Charger Label
Your original charger label is another useful way to verify the charging requirements of your Addmotor M-150.
Addmotor M-150 charger label
Verify the original charger shows the compatible 54.6V output.
If your charger shows a substantially different output or your charging port looks different, send us photos before using a replacement charger.
Which Addmotor M-150 Models Are Covered?
This guide applies to the Addmotor Motan M-150 48V e-bike battery and charging compatibility configuration documented here.
Smart Charging for Everyday M-150 Use
You don't necessarily need to charge your M-150 to 100% after every ride. CyberPika gives you four selectable charging targets.
The CyberPika charger defaults to 80% Daily Mode, allowing partial charging without continuously monitoring the battery.
🛡️ Worry-Free Compatibility Guarantee
If the charger or connector doesn't work with your bike as expected, we'll help troubleshoot the setup and provide a compatible replacement or refund when appropriate.
If your charging port or original charger looks different from the examples above, send us your exact bike model, a photo of the charging port, and a photo of the original charger label. We'll help verify compatibility before you charge.
View the M-150 Compatible Charger →Addmotor M-150 Charger FAQ
What charger does the Addmotor M-150 use?
The documented setup uses a 48V lithium-ion battery system and a 54.6V full charging output with a XLR 3-pin (3-Pin XLR) charging connection.
What voltage charger does the Addmotor M-150 need?
The documented 48V lithium-ion battery system uses a 54.6V charging output.
What connector does the Addmotor M-150 use?
The setup documented on this page uses XLR 3-pin (3-Pin XLR). CyberPika connects using Built-in XLR 3-pin plug.
Do I need an adapter for the Addmotor M-150?
No additional adapter is required for the documented setup because the CyberPika charger uses its built-in XLR 3-pin connector.
Are there different Addmotor M-150 charger versions or generations?
Check specific battery production year if different from standard MOTAN series configurations.
Can I charge my Addmotor M-150 to 80%?
Yes. The CyberPika Smart Charger includes an 80% Daily Mode and defaults to this setting. You can switch to 100% when you need maximum available range.
CyberPika 48V Smart E-Bike Charger with built-in XLR 3-pin connector
Addmotor M-150 · MOTAN M-150 · 54.6V Charging